Installing/replacing sanding disc
1. Using the hes key provided, loosen the positioning bolt.
2. Move the sanding belt into the vertical position.
3. Lock the sanding belt by tightening the positioning bolt.
4. Pull the belt tension lever toward you to release the belt tension.
5. Place the sanding belt over the drive roller and idler roller with the directional arrows running counterclockwise. Be sure the sanding belt is centered on both drums.
6. Push the belt tension lever back into place to apply the belt tension.
NOTE:
1. Please follow the safety instructions in the manual.
2. If any parts are damaged or missing, please contact our online service.