Feature
●Creates connection from flat speaker wire to regular speaker wire
●Made for Sewell Ghost wire
●Includes 4 terminal blocks. Ghost wire purchased separately
Description
Ghost Wire Termination Block
Ghost Wire Termination blocks make terminating Ghost wire to regular speaker wire a breeze. These terminal blocks are designed specifically for use with Ghost Wire (Sold Separately).
How to Terminate Ghost Wire
- Peel back the white backing about 1” and cut it off, exposing the adhesive and conductors.
- Trim away white covering in between and at the edges of the conductors.
- Remove the white covering from the opposite side of the conductor. It does not have adhesive between the conductor, and should leave a nice clean copper surface when removed.
- Fold the conductors once, keeping the clean copper surface outwards.
- Insert the conductors into the Terminal Block.
- Insert your standard speaker cable in the other end of the terminal block and tighten the set screws.
- Close the Terminal Block.
|
|
|
|
|
|
|---|---|---|---|---|---|
| Sewell Ghost Wire Termination Block, 4 Pack | Sewell Ghost Wire Terminal Block, 14, 16, and 18 AWG, 4 Pack | Sewell Ghost Wire Terminal Block | Sewell Ghost Wire Terminal Block, 14, 16, and 18 AWG, 8 Pack | Sewell Ghost Wire 4 Conductor Terminal Block, 14, 16, and 18 AWG | |
| Conductors | 2 | 2 | 2 | 2 | 4 |
| Maximum Wire Gauge | 14 AWG | 14 AWG | 14 AWG | 14 AWG | 14 AWG |