How to Measure:
Depending on your layout configuration, you may need more than one tin ceiling kit to complete your space. Learn how to measure for a ceiling with our 1-minute video. Find this video under the product image carousel that is located above.
How to Paint (Unfinished Tiles):
Water-based products cannot be used directly on Unfinished tin ceiling tiles; however, you can use an oil-based primer. Once the tiles have been primed, you are able to use a paint of your choice. Sherwin Williams and Benjamin Moore also offer DTM (direct-to-metal) paints. The DTM paints can be painted directly on the metal and will eliminate the need to use a primer.
How to Install:
When installing onto drywall, use nails and construction adhesive, like Liquid Nails or Power Grab by Loctite. The nails will keep the panels tight to the wall while the adhesive dries. To eliminate water from getting behind the panels, caulk the bottom seam along the countertop with clear silicone or colored caulk. Check out the Installation Guide (located XYZ).
How to Clean:
We field a lot of questions on how to clean tin ceiling panels. The assumption is they must be hard to clean. The answer is quite the opposite. Rather than using hash abrasive chemicals, you use a damp cloth with either soap or a mild detergent. NOTE: Unfinished tiles must be finished (see section How to Paint) otherwise they will rust. Unfinished is an option for those who want to paint them custom colors.
Got Questions?
Ask your product and installation questions below and well get back to you with an answer.