Feature

●Brand new and high quality multi-color LED light mist maker with power adapter
●With 12 LED (red, yellow, blue) colorful changing lighting, add a stunning mist effect to your pond or water
●It can be used as an air humidifier to remove dust, preserve moisture, filter the bad smell and fresh the air
●No heat or chemicals used. Easy to operate, long service life, self-protection. Atomizing slice can be changed
●Great decoration for fish , indoor or outdoor fountains, water feature, water crafts


Description

11

11

11

11

Water Level Sensor

The induction is sensitive, which can effectively prevent the atomized tablet from drying out. The depth of the water level must exceed the 2-3CM sensor.

Wall Power Supply

Resistant to moisture, avoid rain. Easy to use, safe and stable output.

Power Cable

Original quality male and female power connectors. The interface is designed to prevent accidental contact and power failure.

11

Precautions

01Please do not turn the atomizer upside down after connecting the power, it will damage the atomizer.

02 Please make sure that the operation time does not exceed 10 hours per day.

03 When the atomizer is on, please do not touch the atomizing sheet.

04 To ensure the quality of water, please use clean tap water. (Deterioration of water quality will affect the service life)

05 Before moving or repairing, please turn off the power.

11

11
Ultrasonic nebulizer

  • 24V transformer
  • water level sensor
  • Atomization tablets
  • three colored lights
  • 14 mm diameter rubber stopper
  • 1.3 Power cord
  • 1.5 Power cord
  • Male and female connectors

Tricolored degraded lights

Principle of ultrasonic nebulizer

The three colors of red, yellow and blue change color alternately.the LED is made of semiconductor material, which has low power consumption, high brightness and long service life (8.1 million hours of normal light emission). Increase the aesthetics and the atomized waterscape is full of fairy-tale spirit.

Instructions

01. Place the atomizer flat in the water container, then pour clean water into the container until the water surface exceeds the atomizer sheet by about 50mm (i.e. the water level should exceed the door-shaped or 1-shaped induction head by 0.5-2CM).

02. Connect the power cord of the atomizer and the transformer, then connect the transformer to the power supply (note that the input voltage of the transformer should match the local voltage), the LED light of the atomizer will light up, indicating that the atomizer is on and start the mist production at the same time.

03. The atomizer will spray water outward when it comes out of the fog, cover the atomizing head with a water holding frame and place a ball or other decorations on the water holding frame.

04. The atomizer has the function of automatic water cut protection, if the water level is lower than the sensor, the atomizer head will automatically stop working.

05. You can also add essential oils or fragrances to the water to change the air quality.

Power 700MA/24V
Adapter Voltage 110~240V
Atomizing Amount 500ml/h
Operating Temperature +5℃~-45℃
Suitable Water Depth 4~6cm / 1.57~2.36in
Mist Maker Size(Diam. * H) Approx. 4.6 * 2.5cm / 1.81 * 0.98in
Atomizing Slice Diameter Approx. 2cm / 0.79in
Atomizing Head Approx. 1.5cm / 0.59in
Line Length Approx. 1.4m / 55.1in
Weight Approx. 203g