1. Trouble Shooting:
Display show: “H” to mean: the scale has exceeded the weight limited (over loaded)
Display show:“-E”to mean: the batteries power are too low, it needs to replace theBatteries or Operate by adaptor.
2.Re – Calibration Method:
a.When the scales is powered off, press the ON/OFF key until to show:PE xxx, release it.
b.Press both ON/OFF and MODE keys at the same time until to show: E – 100,
c.Press MODE key again will show: E – 50, E – 25, E – 10, E – 5.
d.Place a Standard calibration weight: 100kg or 50kg or 25kg or 10kg Or 5kg on the middle of the platform according to the LED shown digit,(For example: E – 10, place a standard 10 kgs calibration weight),
e.Until The LED show: “Good”, calibration is over.
Attention: more weight, more accuracy after calibration.