Feature
●Our U-bolts are manufactured from high quality 304 Stainless Steel in the U.S.A. DAD-FAS2
●DO NOT USE an impact or powered socket driver. Ignoring this instruction will cause U-Bolt Galling / Seizing / Breaking / Failure/ Expletives /Sawzall. Lets keep it Fun, and Successful (Your Wife is watching).
●ATTENTION: To determine the Height of the U-bolts that You need, measure the total height of the metal and members to be "clamped" and add 1" for the Locknut and washer, That will be the Inside Height that YOU NEED.
●In this package are (8) SS U-Bolts, (16) SS Washers, (16) SS Locknuts made out of 304 Stainless Steel.
●NO plates or brackets are included in this package.
●The 3-1/16" width is the clear Inside measurement between the "Legs" of the U-Bolt and they will fit down over 3" wide axles or 3" wide cross members.
●The 4- 5/16" Height is the inside dimension measurement from under the top of the "U", to the bottom tip of the threaded"Leg".
●Threading: 1/2"-13 with a thread length of 2-1/2".
Description
