Feature(may vary by option.)

●ASPHALT ANCHORING KIT: Stop wasting time pouring concrete! BoltHolds industrial in-ground anchors and anchoring grout allow you to install anything on asphalt in three simple steps, offering a fast, cost-effective, and reliable solution to asphalt mounting. This AK-4 Kit includes four SP10-38 (3/8"-16 x 6") Zinc-Plated Anchors with a pre-installed 1" long bolt and 1" diameter washer and two bags of EPX2 cement-based Anchoring Grout.
●LIGHT-TO-MEDIUM LOAD: Pull rated for 1,500 lb! Designed for a light-to-medium load, BoltHold SP10-38 chemical anchors resist at least 1,500 pounds pull and 1,000 pounds of moderate shear force at ground level. Rated for 200 in-lb rotary torque, the anchors welded spiral offers a strong bond with the grout, while the washer at the top prevents the anchor from dropping below the surface or being pulled up into the mounting plate when tightening the bolt.
●LONG TERM STABILITY: Creates a stress-free bond that lasts! Due to asphalts weaker nature, typical expansion-type wedge anchors used in concrete wont hold to the pressure. BoltHold anchors solve this problem by embedding deep into the compacted gravel below the asphalt layer to increase the shear resistance and ensure long-lasting stability—perfect for safely installing carports, sheds, bike racks, signage, lights, parking barriers, and many more asphalt mounting applications.
●EASY TO INSTALL: BoltHold makes asphalt anchoring a breeze! For quick installation, drill a hole into the asphalt and the gravel below it and fill with EPX2 Anchoring Grout (included). Push in the anchor until it is flush with the asphalts surface and allow grout to harden. Anchors are ready for use in 15 mins to 1 hour, depending on grout and ground temperature. Once installed, anchors are flush to the ground and pose no tripping risk or roadway hazard.
●ASPHALT ANCHORS CORP: We pride ourselves on offering reliable and effective solutions for asphalt mounting. Our BoldHold anchoring products are manufactured with high-grade materials and tested to provide you with long-lasting durability you can trust.
●WARNING: Please note thaat the anchors are quite large -- 6 inch long and require a ⅞" hole. Some customers envisioned the anchors to be similar in size to expansion anchors usded on concrete. Please consider size before ordering.

[AK4: SP10 + Grout Kit]




[SP58 - Zinc Plated]




[SP12 - Stainless Steel (5  & 8   x 12  )]




[SP18 - Zinc Plated]




[SP10 - Zinc Plated]




[eAK-4 Kit]




[SP12 - Stainless Steel (3  & 8   x 12  )]





Description

BoltHold - AK-4 Asphalt Anchor & Anchoring Cement Kit

Stop wasting time pouring concrete and get the reliable asphalt mounting solution! BoltHolds industrial in-ground anchors and anchoring grout allow you to install anything on asphalt in three simple steps, offering a fast, cost-effective alternative with long-term stability. This AK-4 Kit includes four SP10-38 (3/8"-16 x 6") Zinc-Plated Anchors with a pre-installed 1" long bolt and 1" diameter washer and two bags of EPX2 Anchoring Cement.

1,500 LB Force Rating

Designed for a light-to-medium load, BoltHold SP10-38 anchors resist at least 1,500 pounds pull and 1,000 pounds of moderate shear force at ground level.

Better Stability

A stress-free bond that lasts! BoltHold anchors solve the problem of asphalts weak nature by embedding deep into the compacted gravel below the asphalt layer to increase the shear resistance and assuring long-lasting stability.

Versatile Mounting Applications

Perfect for safely installing carports, sheds, bike racks, signage, lights, parking barriers, and many more asphalt mounting applications.

3 Step Installation

BoltHold makes asphalt mounting as easy as 1-2-3!