[3D]
[2D]
[1D]
[1.5D]
[2.5D]
Feature:
The wire screw sleeve is a new type of fastening technology which can effectively improve the connection condition and greatly raise the reliability of screw connection.
1.Universal for Metric or Inch Hole:Thread inserts can works for converting between metric and inch thread holes, very convenient and fast.
2.Better ThanThe Normal Locking Device:The locking type wire screw sleeve can lock the screw into the threaded hole, so that the screw is not loose when subjected to shock vibration, which is better than the normal locking device
3.Excellent Connection Performance:Strengthen the connection strength and improve the connection condition, avoid sliding wire, wrong tooth phenomenon, and obtain excellent connection performance.
4.Widely Appllication: Significantly improve thread strength and wear resistance when applied to low‑strength engineering materials such as aluminum alloy, zinc alloy, alloy, copper, plastic, engineering plastics, etc.
Specification:
Item Type: Thread Inserts
Material: SUS304
Model: M10x1.25
Thread Specification: M10x1.25 (mm)
Turn Number: 13.3 turns
Outside Diameter Before Installation: Approx. 12 ~ 15.5mm / 0.5 ~ 0.6in
Diameter of Drilling Drill Bit for Installation: Approx. 10.3mm / 0.4in
1D/1.5D/2D/2.5D/3D:Length After Installation: Approx.
10mm / 0.4in
15mm / 0.6in
20mm / 0.8in
25mm / 1in
30mm / 1.2in
Thread Protective Sleeve Model Specification Description:
For Example: M3x0.5X1.5D, which means that after the screw set is completed, the female thread is M3, the pitch is 0.5, and the length is 1.5D (length refers to 1.5 times the diameter, that is, 1.5x3=4.5mm ), the length here refers to the length after installation.
Package List:
50 x Thread Inserts