Feature

●🌲【BATTERY】 Compatible with various deep cycle battery options: Sealed, Lithium, Lifepo4, Li(NiCoMn)O2)/Vented/Flooded/Sealed/Gel/NiCd battery ，(lead-acid and lithium, User customize); Sealed, Gel, Flooded and LI (LFP) battery charging parameter pre-set, other battery can be customize charging parameter according your need ，copper wires:6AWG-12AWG
●🌲【12V/24V/36V/48V】 MPPT 60A solar charge controller , Automatically detects 12V, 24V, 36V or 48V DC system voltages. Innovative MPPT technology with high tracking efficiency up to 99% and peak conversion efficiency of 98%.
●🌲【WIDE RANGE SOLAR VOLTAGE/POWER SUPPORT】Controller support High PV Input Power/voltage. Controller can accept Solar voltage up to 160V. When battery is 12V system: Suggest Solar power 720W, suggest range:DC18V~DC72V ; 1440W DC36V~108V when 24V ; 2100W DC54V~144V when 36V ; 2800W DC72V~160Vwhen 48V.
●🌲【Protection】 Electronic protection: Overcharging, over-discharging, overload, and short circuit. Reverse protection: Any combination of solar module and battery, without causing damage to any component.
●🌲【Notiction】If you use sealed lead acid, vented gel battery, and etc, you donnt need to set any parameters, the controller can adjuste automaticly and work normally; but if you use lithium batteries, you need to properly adjuste parameters according to the actual voltage of the battery, becauese the voltage of lithium batteries is unstable, such as acid battery 12V is 12V, lithium battery 12V may be 11.1V or 14.8V.


Description

MPPT 60A Solar Charge Controller MPPT 60A Solar Charge Controller

MPPT 60A Solar Charge Controller

Rated Current: 60A
Battery Voltage: 12V / 24V / 36V / 48V AUTO
Max PV Power : 720W(12VDC) , 1440W(24VDC) , 2160W(36VDC) , 2800W(48VDC)
Max Solar Input Voltage: 160V
Three Charging Mode: Constand Current (mppt), Equalizing Charge, Floating Charge
Maximum Efficiency:tion: ≥99%
Multiple protections: overcharge/over discharge/ overheat/reverse/overload/short-circuit protection
Battery Type: Lithium, Lifepo4, Li(NiCoMn)O2)/Vented/Flooded/Sealed/Gel/NiCd battery
W. 1 year
MPPT 60A Solar Charge Controller 48V 24V 12VMPPT 60A Solar Charge Controller 48V 24V 12V

Multiple Battery Adaptation

Fit for USER(can be set Lithium, Lifepo4, Li(NiCoMn)O2)/Vented/Flooded/Sealed/Gel/NiCd battery. User programmable for absorption voltage/Floating voltage/Low voltage disconnect./Load Timer. Real-time energy recording.

Max Input Power:

DC18V ~ DC72V (12V) 720W

DC36V ~ DC108V (24V) 1440W

DC54V ~ DC144V (36V) 2160W

DC72V ~ DC160V (48V) 2800W

60A Solar Charge Controller 60A Solar Charge Controller

60A Solar Charge Controller 48V 24V 12V60A Solar Charge Controller 48V 24V 12V

Solar Charge Controller Solar Charge Controller

LCD&LED Display

Easy operation, details data display in real-time,

Fashion air hole design

Big enough for air to go in, Fast heat dissipation can keep the solar controller in good working condition and improve power generation efficiency

High quality wiring terminals

copper wires:6AWG-12AWG

copper wires:2.5mm-6mm

MPPT Solar Charge Controller 60A 48V 24V 12VMPPT Solar Charge Controller 60A 48V 24V 12V

TIPs:

  • Always connect battery first!!! Make sure enough batteries’ voltage let controller recognize the right system voltage. The disassembly sequence is contrary to the wiring order. NEVER connect the solar panel array to the controller without a battery
  • DO NOT connect any Inverter/ wind/ Alternator or Charger into the charge controller! connect the Inverter directly to the battery.
  • Ensures solar input voltage higher 3V or more than batteries’ voltage and total input power in the range. if input power is too low for max input power, it may be appears to have been discontinued., the charging current almost be zero when controller is floating charge.
  • Parameter Setting Rules：Floating voltage > Low voltage reconnect > Low voltage discharge.
  • The solar controller will stop output when the battery under 10.7V. The LCD will be blank when the battery under 8V and it will re-output when the battery up to the 12.6V (adjustable).
  • Install the Charger controller to the battery as close as possible. Tighten the wire, Carefully read battery manuals before operation.
  • Do NOT let the positive (+) and negative (-) terminals of the battery touch each other.