Feature
●1.(-Wind Turbine controller-): Wind charge controller can be used for 0-600w wind turbine. It helps to control wind generator charge battery automatically. When the battery is fully charged, brake can be taken effect automatically by the interior circuit. When the battery voltage drops to restore voltage level, wind turbine can recover to charge battery automatically. So wind controller to protect the wind turbine and the battery.
●2.(-Automaticity-): This wind turbine controller can auto match 12/24 system. Voltage and current limiting are be controlled during recharging to ensure the best charging effect. Meanwhile, it provides the maximum protection to the wind turbine and battery.
●3.(-Connection-): Unique reverse connect protection circuit. For improper operation of positive and negative electrode, user dont need to replace the fuse, only to reset the positive and negative in correct point. Make the whole system will be more reliable.
●4.(- Good heat dissipation-): Wind generator charge controller use Aluminum alloy shell and Therming Dissipine Structure with good Heat Dissipation. The rectification and brake circuit part has adopted integrated module design, whatever heat dissipation or reliability, all further advanced than the traditional design.
●5. (-Protection-) The fully waterproof protection which grade reach into IP67 above. Charge controller can work steadily even in very humid environment. Also including Lightning protection, automatic over-voltage braking, battery reverse connection and open protection.
Description
High-Quality Copper Wire
Wire specification: AWG15 (1.5mm²)
Waterproof Wind Turbine Controller
Parameter
Power: 0-600w wind turbine
DC output voltage: DC 12V/24V Auto
The maximum charging current: 50A(12V) / 25A(24V)
Battery charge breaking voltage: DC14.5V±0.3V(12V) / 29V±0.3V(24V)
Wind turbine speed limit voltage: DC14.5V±0.3V(12V) / 29V±0.3V(24V)
Static power consumption: 0.008A
Waterproof grade: IP67
|
|
|
|
|---|---|---|
Dual LED indicator1.Battery indicator:(Green) Always on, the battery is connected normally. 2.Charger indicator:(Green) Always on, the wind turbine is charging. 3.Brake indicator:(Red) Always on, the wind turbine brakes. |
Good Waterproof PerformanceThe waterproof grade of the controller is IP67, which can be used outdoors. The wind controller is small size with light weight, easy to install. |
Good Heat DissipationWind charge controller use Aluminum alloy shell and Therming Dissipine Structure with good heat dissipation. The rectification and brake circuit part has adopted integrated module design, whatever heat dissipation or reliability, all further advanced than the traditional design. |
Front View
Right Side View
Back Side View
Left Side View
Wiring Instructions:
Connect the red wire of the controller to the positive electrode of the battery; The black wire is connected to the negative electrode of the battery; And the three green wires on the controller are connected to the three wires of the wind generator (Three wires can be connected arbitrarily). As shown in the figure.
NOTE: Do not reverse the positive and negative poles to avoid burning the controller.