Feature
●1. ATTENTION: GARDEN HOSE OR LOW PRESSURE WATER HOSE NOT APPLICABLE!
●2. High pressure washer gun and Foam lance core are made from heavy duty brass. The gun is M22-14 Thread inlet fitting, which is for M22-14 press washer hose. Adjustable Foam cannon with 1/4" quick disconnection fitting. Requires pressure washer to over 1200 PSI pressure for use, Maximum pressure: 4500PSI. 140 degree F Maximum. Capacity: 0.22 Gallon/ 1L. 5 nozzle tips kit with 0 Degree, 15 Degree, 25 Degree, 40 Degree and Soap-degree. Vary jet pattern of nozzles for a variety of uses.
●3. High Pressure Snow Foam Cannon can be Adjusted to your specific needs. The top knob controls the amount of water and the thickness of the foam, and the foam gun produce the thick foam. Front rotating adjustable nozzle to change jet pattern: water column and fan.
●4. High Pressure Washer Gun, M22-14 Thread inlet fitting (inside diameter 14mm). 1/4 inch outlet quick fitting, the outlet is small but suitable. The gun features a locking safety handle to prevent accidental jets. Simple to assemble, disassemble the nozzle and the washer gun.
●5. Put some liquid soap and water to a ratio of you like in the bottle to thicken the foam. Then connect the 1/4" quick connect plug to the pressure washer gun. Adjustable nozzle for precise mixing and foam generation.Turn the top knob right/off to get the thickest mixture and adjust the nozzle to get the right jet pattern. 5nozzles can be applied after the car is covered with foam then clean the car. You car will be back to new again.
Description
Enjoy Foam Party!
- Prepare Foam Cannon by filling the soap solution bottle with your favorite car wash soap and warm water like 1:4 ratio.
- Mix the water and soap by shaking the bottle for a while. Then attach the Foam Cannon.
- Fine turn the soap mixture knob to the desired foam thickness, and adjust the front fan nozzle to the perfect width to cover the vehicle quickly.
- Thick car wash foam remove dirt faster than ever.
- Wait for 5 minites, rinse down the car with water. You will get a "new" car.
-
DUSICHIN Foam Cannon
- 1/4" quick disconnection fitting
- Material: Plastic, Stainless Steel and Brass
-
5 Nozzle Tips
- Choose different nozzle according to the actual .
- Such as watering flowers and plants, washing car.
-
Structure Diagram
- If you need to disassemble or assemble, please refer to the picture above.
1 DUSICHIN Foam Cannon 2 5 Nozzle Tips 3 Structure Diagram
Pressure Washer Gun
- 3000 PSI high pressure washer gun
- 1/4 inch outlet quick disconect fitting
- M22-14 Thread inlet fitting
Adjustable Foam Cannon
The Adjustable Nozzle :
- Adjustable spray nozzle to change spray model—water column pattern and fan pattern
Control foam concentration:
- Adjust the knob on the top to control how much water is mixed in and the thickness of the foam spray
- (+)：more water,less foam bubbles . (-)：less water,more foam bubbles
DUSICHIN Foam Cannon Snow Foam Lance Pressure Washer
 DUS-018 |  SFL-001 |  DUS-618 |  DUS-518 |  DUS-311 |  DUS-218 |  DUS-003 | |
|
Customer Reviews
| 5,185
| 15,028
| 119
| 71
| 363
| 411
| 1,893
|
|
Price
| $26.99 | $14.99 | $32.99 | $34.99 | $49.99 | $33.99 | $20.99 |
|
Require Pressure
| 70BAR-1000PSI | 70BAR-1000PSI | 70BAR-1000PSI | 70BAR-1000PSI | 70BAR-1000PSI | 70BAR-1000PSI | 70BAR-1000PSI |
|
Maximum Pressure
| 200BAR-3000PSI | 200BAR-3000PSI | 200BAR-3000PSI | 200BAR-3000PSI | 200BAR-3000PSI | 200BAR-3000PSI | 200BAR-3000PSI |
|
Container
| 33 Oz | 33 Oz | 33 Oz | 33 Oz | 33 Oz | 33 Oz | 33 Oz |
|
Nozzles
| 5 Nozzles | None | 7 Nozzles | 7 Nozzles | 5 Nozzles | 5 Nozzles | None |
|
Specification
| M22-14mm | None | M22-14mm,M22-15mm,3/8”Connect | M22-14mm,M22-15mm,3/8”Connect | M22-14mm | M22-14mm | M22-14mm |
|
Material
| Plastic,Stainless steel ,Brass | Plastic,Stainless steel ,Brass | Plastic,Stainless steel ,Brass | Plastic,Stainless steel ,Brass | Plastic,Stainless steel ,Brass | Plastic,Stainless steel ,Brass | Plastic,Stainless steel ,Brass |