3/4" RING A153-D HOT DIP COIL ROOFING NAILS similar to Steelhead GCR0DHDR
Make sure your tool model will accommodate 3/4" length.
For the best results we recommend using MAX CN450R, CN445R, CN445R2, CN445R3
PLEASE NOTE: Because of their extremely short length 3/4" coil roofing nails may tumble in the chamber when fired causing the nail to come out sideways. This cannot be prevented even with coil roofing nailers that claim to accept 3/4" length. Please be aware that 3/4" coil roofing nails may not fire accurately 100% of the time. If this is a concern please use 7/8" length.
All our ASTM A153-D Hot Dip Nails meet and/or exceed the United States standard for Hot Dip Zinc Mass Coating of ASTM A153 class D Fasteners. HDG grade nails are first cut to length and heads formed from a large spool of brite steel wire rod. Then nails are Hot Dipped into Molten Zinc until a thick uniform coating is achieved across the entire surface of the nail. Next, the nails are either packaged in bulk or collated together into strips or coils. Our HDG Nails meet and or exceed the ASTM A153 Class D Fastener specification.
Manufactured according to roofing industry specifications; these HOT DIPPED nails are 15 degree wire collated, 3/4" length with a head diameter of .375" (approx. 3/8" diam) and .120" (11 gauge) RING shank. Ring shank nails, also known as annular thread, offer superior holding power and helps prevent nails from backing out over time. Commonly used in composition asphalt shingles applications. Meets the minimum requirement for ACQ Treated Lumber but is Not Recommended. For ACQ Treated lumber we recommend Stainless Steel. Each box contains approximately 3,600 nails.
Applications Include:
Asphalt and fiberglass shingles for both new roofs and reroofing. Also for attaching waterproof tar paper, roofing felt, metal drip edges, insulation board, cementitious fiber board products and vinyl siding.