Feature
●Our chains are made in the USA and made from US made T304 Stainless Steel!
●This comes with 2 chains - one 27 inch chain and one 4.5 inch chain
●These are the same chains that are issued to the US military.
●Our T304 stainless steel chains will not rust. These are MilSpec #3 size chains. The ball diameter is 2.4mm.
●To connect the chains, put one ball in the connector and pull the chains away from the connector until the chain snaps into place. These are real stainless steel and are a bit harder to get connected.
Description
Tag-Z T304 Stainless Steel Military Ball Chain Set
|
|
|
|
|
|---|---|---|---|
Tag-Z T304 Stainless Steel Ball ChainsThe Tag-Z Military Chain Sets are made right here in the United States from US Made T304 Stainless Steel. Our sets come with one 27 inch chain and one 4.5 inch chain just as issued in the military. The balls on the chains are 2.4mm in diameter so they fit through the holes on the tags perfectly. There are appx. 8 balls per inch of chain. |
US Manufactured Ball ChainTag-Z Military dog tag chains are proudly made in the USA by the only ball chain manufacturer that supplies the US Military. All of our ball chain is manufactured to the highest quality standards. Our ball chain manufacturer has been supplying the US Government with these iconic chains since 1938 and is the worlds largest ball chain manufacturer. |
How to CLOSE the Ball ChainPut the ball into the connector and pull both sides of the chain away from the connector until the ball ‘snaps’ into place. These are really tough USA made stainless steel ball chains so sometimes it takes a good tug for it to snap into place. |
How to SHORTEN the chainFor some folks the chain may be a little too long and hang too low on their chest. Not a problem! You can shorten the ball chain with a pair of wire cutters. Just put the blades of the wire cutters between the balls and squeeze. Easy as that! Just be careful not to shorten it too much at one time. Once you cut it, it cant be put back. |
