Feature

●【12V 80W Oil Extractor Pump】Included: 1 x Pump; 1 x Outlet Hose; 1 x Inlet Hose; 2 x Hose Clamps; 2 x Bigger Battery Clamps; Ideal for Motorcycles,Cars,Quads,Truck,Boat,Forklift,Generator,Tractor,Scooter and other 12V vehicles.
●【Specification】This update oil diesel extractor pump is 12V 80W. Maximum current: 6A. Perfect for quick and easy oil changes that you can do at home. It can be used for changing oil 3L/min.
●【Quick and Clean】Ideal Equipment for quick and clean oil-changes. No need to lay under the machines or vehicles.Easily removes oil from cars, motorcycles, RVs, boats, lawn equipment without removing the drain plug.
●【Easy to Use】You just need to place the inlet/outlet hoses at the appropriate positions, connect the power clamps to the car battery and press the button. The oil will simply draw out the motor through the oil dipstick bore.
●【Note】This high efficient self-priming oil extractor pump is easy to pump various fluids and oils. But pls note that NOT suitable for extracting: water (no lubrication of the pump), gearbox-oil (too viscous),petrol, kerosene.


Description

HighFree bannerHighFree banner
80W Oil Change Pump Extractor80W Oil Change Pump Extractor

Upgraded 80W Oil Change Pump Extractor

for Car Boat Motorbike Truck ATV and Other Vehicles

Extracting motor oil from your vehicle without Mess & Specialised. Quick and efficient.

It can be used for your Car, Motorcyle, Scooter, Quad Bike, Truck, Boat, Forklift, Generator, Tractor, Ride On Mower Etc Siphon & Transfer Diesel To Cars, Trucks, Ships, Boats, Tractors, Farm Machinery, Plant Equipment Etc.

WARNING: This product can not use to extract water, gearbox oil or flammable liquids(such as fuel, petrol, gasoline)

If the product have any problems, well give you a free-return.

Specificaiton：

  • Input Voltage: DC 12V
  • Wattage: 80W, Current: 5A
  • Motor Oil (40-60 degrees)
  • Flow Rate: approx. 3L / min
  • Diesel or heating oil: approx 250 L/H
  • Sound pressure level:70dB(A)

Battery ClampsBattery Clamps

Oil ExtractorOil Extractor

Clean and TidyClean and Tidy

Package includePackage include

Upgraded Battery Clamps

  • Black for Cathode
  • Red for Anode
  • Changing the polarity of the power supply will change the direction of oil discharge

Easily Connect

  • Please connect it correctly, otherwise it is easy to malfunction.
  • It is mainly used to extract waste gas from the car, not to refuel.

Warm Tips

  • We recommend a short break after 10 minutes continuous usage (should not exceed 30 minutes) to allow the unit to cool.
  • Clean this pump after use, you can flush with washing detergent and then run with fresh transmission oil to run out water/detergent.

Package Included

  • 1 x Pump
  • 1 x Outlet Hose
  • 1 x Inlet Hose
  • 2 x Hose Clamps
  • 2 x Battery Clamps
  • 1 x User Guide
HOW TO USEHOW TO USE

Easy Operation:

  1. Warm up the engine for about 5 minutes to reduce the oil viscosity. Its important that the engine oil is warm (not hot) when extracting.
  2. Turn off the engine and loosen the filler cap (for the time being)
  3. Connect the power clip of the pump body directly to the battery
  4. Remove the oil level gauge and insert the thin hose of the pump. (Notice if you put it to the innermost very quickly,it wont work)
  5. Gradually insert the hose while operating the pump.
  6. When it is inserted to some extent,the operating noise will change and the oil will start to be sucked up.
  7. Put the thick discharge hose on the waste oil tray. (If you put it directly in the waste oil treatment box, you will not know the amount of waste oil collected.)

How to use oil change pumpHow to use oil change pump
OIL CHANGE PUMPOIL CHANGE PUMP
WT-0081 B08243WC2H Oil Diesel Fluid Pump Extractor 60W 12V B08KZQPX23 Oil Change Pump Extractor 12V 60W
Oil Change Pump Extractor Oil Diesel Fluid Pump Extractor 60W 12V Oil Change Pump Extractor 12V 60W
Color Red Yellow Red
Specification 60W 12V 60W 12V 60W 12V

Product information