Feature(may vary by option.)

●【Pump Size】Measuring at 5.1 x 5 x 3.3 inches, this oil extractor pump runs on 12V DC input voltage, with a rated current of 5A. This oil suction pump operates at a sound level of 70 dB, and produces less than 2.5m/s2 of vibration. This oil change pumps maximum flow rate is 1.5 L/min (1 l/min), and can reach a maximum delivery height of 2.3 feet.
●【Clean and Tidy】This electric oil extractor is an ideal tool for quick and clean oil changes. With the hoses and hose clamps included in the package, theres no need to worry about messy spills or leaks during the extraction process.
●【Easy Installation】Installation is a breeze, simply attach the inlet and outlet hoses to the fluid pump, tighten the hose clamps, connect the power clamps to the vehicles battery, and switch the button on. This process is very simple and you can often do it by yourself to ensure your engine runs smoothly.
●【Package Including】This 12V oil pump for car comes with an outlet hose, inlet hose, hose clamps, and battery clamps. All the necessary components for quick and easy oil change are included.
●【Ideal Equipment For】This oil extractor is versatile, and can be used for a range of applications, including motorcycles, caravans, automobiles, quad bikes, industrial/medical/chemical equipment, water purification and treatment equipment, vehicle cleaning, and agricultural spraying. This transfer pump is NOT suitable for gasoline/petrol. Do not use this pump to extract water, gearbox oil or easy flammable liquids (fuel, petrol etc).

[Red]




[Yellow]





Description

Oil Change Pump ExtractorOil Change Pump Extractor

12V 60W Oil Change Pump Extractor by DASBET is a versatile and durable tool that enables you to easily and safely change your vehicles oil, helping you to keep your engine running smoothly and efficiently for longer, while also saving you money on expensive trips to the mechanic.

Close Look of DASBET 12V 60W Oil Extractor Pump

Oil transfer pumpOil transfer pump

Inlet Hose & Outlet Hose

The oil extractor pumps hose clip provides a leak-free seal for mess-free oil changes.

Fluid extractor pumpFluid extractor pump

Battery Clamps

For easy installation, the battery clamps in the oil drain pump are color-coded: black for cathode and red for anode.

Manual oil pumpManual oil pump

Simple Power Switch On/Off

Use the oil change pump by positioning hoses correctly, attaching power clamps to the vehicle battery, and pressing the start button.

Electric oil pumpElectric oil pump

Hose clip

The oil suction pump features a durable and adjustable hose clip.

Specifications of DASBET 12V 60W Oil Extractor Pump

Material plastic & aluminium
Color black, yellow
Input Voltage DC 12V
Wattage 60W
Current 5A motor oil (40-60 degrees)
Flow Rate approx. 1L / min
Diesel Flow Rate approx. 250L / Hour
Line Length approx. 71cm/28
Inlet Hose&Outlet Hose length: approx. 155cm/61; outer diameter: 6mm/0.236; inner diameter: 4mm/0.157 & length: approx. 124.5cm/49; outer diameter: 12mm/0.472; inner diameter: 10mm/0.39
Drive mode electric
Pump shaft position side vertical
Impeller structure semi-open impeller
Number of impellers single stage
Impeller suction method single suction
Principle gear pump
Transmission medium oil pump

Step To Use DASBET 12V 60W Oil Extractor Pump

Electric oil pumpElectric oil pump

  • Warm up your vehicle by running the engine for a few minutes.
  • Locate the oil pan or dipstick tube and extract the dipstick to allow air flow.
  • Connect the Inlet Hose to the pump and place the Outlet Hose into an appropriate container or disposal unit.

Marine oil change pumpMarine oil change pump

  • Attach the battery clamps to your vehicles battery, ensuring that the black clamp is connected to the cathode and the red clamp is connected to the anode.
  • Start pump.
  • When the oil has been fully extracted, switch off and carefully remove the hoses, being sure to avoid any spills or leaks.

Kindly Note for Use 12V 60W Oil Extractor Pump

12V 60W Oil Extractor Pump12V 60W Oil Extractor Pump

  • The unit just use for drawing out diesel oil and hot engine oil ( the temperature is 40℃-60℃).
  • Please clean the oil - extractor by diesel oil and keep both inside and outside clean.
  • The unit is unable to use for combustible material such as gasoline paraffin and so on.

12V 60W Oil Change Pump Extractor12V 60W Oil Change Pump Extractor

  • Package Included: 1 x Pump; 1 x Outlet Hose; 1 x Inlet Hose; 4 x Hose Clamps; 2 x Battery Clamps.
  • If the engine oil is cool , please start engine to properly heat up but turn off the engine when use the unit.
  • Put the waste oil into suitable container to avoid polluting.

Ideal Equipment

Manual oil pumpManual oil pump

Extracting Motor Oil From Your Vehicle Without Mess & Specialised Tools Extract The Oil From Your Car, Motorcyle, Scooter, Quad Bike, Truck, Boat, Forklift, Generator, Tractor, Ride On Mower Etc Siphon & Transfer Diesel To Cars, Trucks, Ships, Boats, Tractors, Farm Machinery, Plant Equipment Etc.

Products of the same series

12V 60W Oil Change Pump Extractor

12V 60W Oil Change Pump

12V 60W Oil Change Pump Extractor

12V 60W Oil Change Pump

Fluid Extractor Manual Oil Changer

7L Manual Fluid Extractor

Fluid Extractor Manual Oil Changer

9L Manual Fluid Extractor

Customer Reviews
4.1 out of 5 stars
81
4.1 out of 5 stars
81
4.1 out of 5 stars
81
4.1 out of 5 stars
81
Price
$47.99 $47.99 $47.99 $55.99
Brand
DASBET DASBET DASBET DASBET
Drive mode
Electric Electric Manual Manual
Color
‎Yellow Red White White
Material
Plastic & Aluminium Plastic & Aluminium Composite materials Composite materials
Application
Most vehicles and machines Most vehicles and machines Most vehicles and machines Most vehicles and machines

Product information