Feature

●The oil extractor pump include:1 x Oil transfer pump; 1 x Outlet Hose; 1 x Inlet Hose; 4 x Hose Clamps; 2 x Battery Clamps.
●The oil change pump extractor is very easy to install.You just need to place the inlet and outlet hoses at the appropriate positions, connect the power clamps to the car battery and press the button. With the oil pump, you can often do it by yourself to ensure your engine runs smoothly.
●The specificaiton of oil change pump: Input Voltage: DC 12V; Wattage: 60W; Current: 5A;Diesel Flow Rate:4 L/ min;Engine Oil Flow Rate(40-60 degree): approx. 1L/ min
●The oil extractor is ideal for quick and clean oil changes. Oil will only be drawn out of the motor through the oil dipstick hole. Simple on/off power switch for your convenience.
●The fluid transfer pump is perfect for changing marine oil.Applicable objects also include cars, motorcycles, scooters, quads, trucks, boats, forklifts, generators, tractors, riding lawn mowers and the transfer of diesel to cars, trucks, ships, boats, tractors , agricultural machinery, plant equipment, etc.


Description

Oil Change Pump ExtractorOil Change Pump Extractor

How to Use the Scavenge Suction Oil Transfer Pump Kit ?

  • Warm up the engine for about 5 minutes to reduce the oil viscosity. Its important that the engine oil is warm (not hot) when extracting.
  • Turn off the engine and loosen the filler cap (for the time being)
  • Connect the power clip of the pump body directly to the battery
  • Remove the oil level gauge and insert the thin hose of the pump. (Notice if you put it to the innermost very quickly,it wont work)
  • Gradually insert the hose while operating the pump.
  • When it is inserted to some extent,the operating noise will change and the oil will start to be sucked up.

After using the oil extractor pump, there is no need to clean the inside of the oil pump and the oil pipe, just wipe the outside clean and put away!

More Details

12V 60W Oil Change Pump Extractor12V 60W Oil Change Pump Extractor

12V 60W Oil Change Pump Extractor12V 60W Oil Change Pump Extractor

Oil Change Pump Extractor Oil Change Pump Extractor

Hose Clips

  • The diesel change pump comes with a 4 hose clips that enables it to thoroughly seal the connection and prevent leaking.

Battery Clamps

  • This clip is made of pure copper with good electrical conductivity, corrosion resistance and rust free.

Transparent Hose

  • The hose is transparent, which enables you to see the progress of oil injecting.
  • This oil extractor pump creates a tight seal that improves its overall efficiency.
Changing Diesel Fluid Changing Diesel Fluid

About AMGSH Oil Extractor Pump Kit

Wide Application:

Our fluid transfer pump kit can be used for your Car, Motorcyle, Scooter, Quad Bike, Truck, Boat, Forklift, Generator, Tractor, Ride On Mower Etc Siphon & Transfer Diesel To Cars, Trucks, Ships, Boats, Tractors, Farm Machinery, Plant Equipment Etc.

Specification:

  1. Material: Plastic & Aluminium
  2. Input Voltage: DC 12V
  3. Wattage: 60W, Current: 5A
  4. Motor Oil (40-60 degrees) Flow Rate: approx. 1L / min
  5. Diesel Flow Rate: 4 L / min
  6. Inlet Hose Length: approx. 155cm/ 61
  7. Outlet Hose Length: approx. 124.5cm/ 49
  8. Line Length: approx. 71cm / 28

Warning:

The siphon pump can not be used to extract water, gearbox oil or flammable liquids.

Package Content:

  • 1 x Pump
  • 1 x Outlet Hose
  • 1 x Inlet Hose
  • 4 x Hose Clamps
  • 2 x Battery Clamps

Product information