Its easy to accomplish 100% shield coverage. Preventing captured Radio Frequency Interference (RFI) from modulating the equipments ground reference requires AQs Noise-Dissipation System (NDS). Traditional shield systems typically absorb and then drain noise/RF energy to component ground, modulating and distorting the critical "reference" ground plane, which in turn causes a distortion of the signal. NDSs alternating layers of metal and carbon-loaded synthetics "shield the shield," absorbing and reflecting most of this noise/RF energy before it reaches the layer attached to the ground.
|
|
|
|
---|---|---|---|
SOLID 1.25% SILVER CONDUCTORS FOR IMPROVED SUBWOOFER PERFORMANCESolid 1.25% Silver-Plated Copper Conductors: A superbly cost-effective way to maximize a video or digital cable, harsh and horrible for full-range audio, but like turning up the “sharpness” for a subwoofer, enhancing articulation and intelligibility. |
POLYETHYLENE AIR-TUBE INSULATIONAny solid material adjacent to a conductor is actually part of an imperfect circuit. Wire insulation and circuit board materials all absorb energy. Some of this energy is stored and then released as distortion. AudioQuest, however, uses Polyethylene Air-Tube Insulation on both conductors, for increased geometry stabilization and improved clarity. Because air absorbs next to no energy and Polyethylene is low-loss and has a benign distortion profile, Polyethylene Air-Tube Insulation, with its high air content, causes much less of the out-of-focus effect common to other materials. |
DOUBLE-BALANCED GEOMETRYSpecifically designed for single-ended applications, Double-Balanced Geometry offers a relatively lower impedance on the ground for a richer and more dynamic experience. While many single-ended cable designs use a single path for both the ground and the shield, Double-Balanced designs separate the two for cleaner, quieter performance. |
COLD-WELDED, HANGING-SILVER DIRECTLY OVER PURE PURPLE COPPER TERMINATIONSCold-Welded, Hanging-Silver Directly Over Pure Purple Copper Terminations. |
Connector Type | RCA |
Length | 5m | 16.4 ft |
Cable Type | Composite |
Compatible Devices | Subwoofer |
Connector Gender | Male |