Feature

●[FITING] which is a replacement for the Febco 765 OEM part. This repair kit is designed for the FEBCO Model 765 EVB 1" and FVB 1-1/4" vacuum pressure breaker valve, vacuum breaker, and backflow preventer. Here are some key points about the SeaEagles 905-212 Bonnet Poppet Repair kit:
●[High Quality] The 905212 kit is made of high-quality plastic and copper, ensuring durability and reliability.
●[Size] The kit is designed to fit the FEBCO Model 765 1" and 1-1/4" valves. The outer diameter of the bonnet part is around 2.64 inches and replacement for Febco 905-212
●[Easy To Install] The 905-212 kit comes ready-to-go and includes all necessary components for installation, such as the bonnet, O-ring, spring, e-ring, washer, stem, rubber disc, poppet, and oil bag. It is easy to install, and installation instructions are provided.
●[No Worries Guarantee]If you have any specific questions or need further assistance regarding this repair kit, feel free to ask!


Description

SeaEagles 765-1inch & 1-1/4inch repair kit Replacement for febco 765-1 repair kit | Febco vacuum breaker repair kit Installation Instructions.
Turn off the water supply, bottom ball valve first,
Relieve water pressure by opening test cocks on side of PVB, Make sure both ball valves on the 765-1 are turned off
Turn the sprinkler controller on manually unscrew the top nut and take off the brass canopy
Take out the old Bonnet & Poppet, (if its too tight use wrench)
Now to reassemble the new parts
Put the new poppet inside (White Pipe Thread Tape, or Oil Bag Included in the Kit,)
Place large O-Ring (included in kit) around the Bonnet.
Thread Bonnet into PVB unit (hand tight only)
Replace Canopy and tighten nut on top of canopy using a wrench, then Open water supply side ball valve first then second ball valve.