Feature●Inline filter holder accommodates 47mm diameter filters for pressure filtration of liquids and gases●Allows filter changes without disturbing attached piping●Maximum inlet pressure is 5.5 bar (80 psi)●1/4" National Pipe Thread Taper Fuel (NPTF) inlet and outlet fittings with stepped hose connectors for 6 to 9.5mm ID flexible tubing●Made of filled polypropylene with nylon hand knobs and a silicone sealDescription
The Millipore XX4304700 In-Line Filter Holder accommodates 47mm diameter filters for pressure filtration of liquids and gases, and allows filter changes without disturbing attached piping. The holder withstands a maximum inlet pressure of 5.5 bar (80 psi) and has 1/4" National Pipe Thread Taper Fuel (NPTF) inlet and outlet fittings with stepped hose connectors for 6 to 9.5mm inside diameter (ID) flexible tubing. It is made of filled polypropylene with nylon hand knobs and a silicone seal.
Specifications
Compatible pre-filters47mm diameter membrane pre-filter; 42mm diameter depth pre-filterMaximum inlet pressure5.5 bar, 80psiFiltration area13.8cm2Inlet and outlet fittings1/4" NPTF with stepped connector for 6 to 9.5mm ID flexible tubingMaximum operating temperature70 degrees C at 5.5 barHolder dimensions7.6cm diameter x 12cm length
Millipore is a supplier of life science, filtration, and laboratory supplies to research, food and beverage, and pharmaceutical industries. The company, founded in 1954, is headquartered in Billerica, MA.