Feature

●PRATICAL POWER BACK ALARM: This utility power return alarm is mainly used during a power outage, its voltage sensing antennae can detect the voltage change. Once the utility power is restored, the power back alarm will emit a loud siren. Equipped with this product, you can know exactly when the utility power is restored and turn off the generator in time, reducing unnecessary power waste.
●ADJUSTABLE SENSITIVITY: The sensitivity of power induction can be adjusted. Adjust the sensitivity of the current sensing antennaes power induction according to the actual situation until the alarm sounds to truly detect the utility power recovery.
●SUPER COMPATIBLE: Works with any new or existing: Generator-ready load center, manual transfer panel, standby system expansion panel, main breaker panel with generator interlock. This handy alarm is suitable for all the family.
●LOUD ALARM: The power back alert sounds a loud 100dB alarm when the power outage ends and utility power is again available and it keeps on until you turn OFF the switch, so youll be sure to hear it either from your basement or over your generator!
●EASY INSTALLATION: This power return alert is intended for installation on any manual transfer panel or generator-ready load center and can be done in minutes. To install simply mount the product within 20 inches of the main breaker with included 3M tape or screws. And you are free from the hassle of checking your neighbors house from time to time!


Description

11
22
  • Adjustable Sensitivity
  • Super Compatibility
  • 100DB Loud Alarm
  • Battery Powered

It is recommended to use indoors to ensure a longer service life.

BRIIDEA POWER RETURN ALERT

Practical Utility Power Back on Alert

Dose not knowing when the utility power returns after losing power drives you nuts? Have you been looking out the window to see if any lights were on?

Briidea Power Return Alert helps you know exactly when the utility power is restored and turn off the generator in time, reducing unnecessary power waste!

The Briidea Power Return Alert is intended to be installed on a manual transfer panel or generator-ready load center. When the main breaker has been turned off during a power outage, this power back alert will sound a 100dB alarm when the utility power returns.

33

Easy Installation

To install simply mount the product within 20 inches of the main breaker with included 3M tape or screws. Coil the flexible 15-inch voltage-sensor antennae around either of the hot legs ahead of the main breaker and connect the ground wire. There is also a manual for your reference.

44

What You Get

We have included all you need to install: the alarm, a 3M tape, 2 screws, 1 small screwdriver and 2 cable ties.