Feature(may vary by option.)
●▶700W Micro Inverter Solar Grid Tie Microinverter IP65 WiFi Control Self Cooling 120V Automatic Identification Power Inverters，High frequency direct modulation and 6-grade power search design micro inverter--In overcast weather, the PV Panel’s output current is extremely tiny, then inverter will automatic open 6-grade power search function, and keep outputing efficent and steady during the low power.
●▶solar micro inverter which can Directly connected solar panels (do not need to connect the battery),microinverter Support Wide Solar Power input(22-50VDC Voltage, 700W Solar Power), Output: 50Hz/60Hz(45Hz ~ 64Hz ), 700W 110VAC,
●▶ 99.5% HIGH EFFICIENCY Grid tie inverter --Maximum Power Point Tracking(MPPT)---high-precision (MPPT)operation power automatic and immediate adjust the solarpanels output power at the maximum output point,made the inverter discharge power with the highest efficiency.
●▶waterproof inverter with Exactly and timely automatic lsland Effect Protection, Adopt complementary PWM to push-pull pure sine wave, Constant Current, Constant Power---constant current and output power without any overload, over-current phenomenon.
●▶grid-tie micro-inverter，Stack using Inverter---- Such as: 4 micro inverter of 260W stacking can achieve 1040W. the number of the stacking is unlimited.
[700W]
[1400W]
Description
Grid tie inverter micro inverter 700W
- Maximum Power Point Tracking (MPPT)---high-precision (MPPT)operation power, automatic and immediate adjust the solarpanels output power at the maximum output point,made the inverter discharge to power grid with the highest efficiency.
- Synchronous High-frequency Modulation 1.Modulation synthesis: half wave and full-bridge modulation synthesis (100Hz/120Hz); 2.Synthetic way: MOSFET full-bridge; 3.High frequency: 50KHz.
- Pure Sine Wave Output---Use SPWM directly to make pure sine wave output.1.Output waveform:Adopt complementary PWM to push-pull pure sine wave, 2.Generate means: enhancement-mode SPWM.
- Power Automatically Locked (APL)--- automatically powers locked in maximum power point, made output more stable.
- Constant Current,Constant Power---constant current and output power,without any overload, over-current phenomenon.
- Exactly and timely automatic lsland Effect Protection
- High-Frequency High Conversion Rate---Adapt high frequency converter, the output more efficient.
- 6-grade power search-n overcast weather, the PV Panel s output current is extremely tiny, then inverter will automaticopen 6-grade power search function,and keep outputing efficent and steady during the low power .
- Wide voltage input(22-50VDC)-1.DC voltage input22~50VDC; 2.Second level power variable voltage conversion.
- High-frequency two-way and one-way grid function---1.High frequency direct modulation,AC half wave synthesis;2.Two-way grid means: Load consume directly. And can reverse AC current transmission.
- Kinds of frequency output function---1.t can apply to 50Hz and 60Hz frequency of AC;2.Frequency range:.45Hz~64Hz,Directly connected to the solar panels (do not need to connect the battery)
- AC 0 angle with high precision auto-detection---High-precision analysing the AC phase angle.The phase shift rate is less than 1%, thus achieve high-precision with phase modulation AC output together, 1.ACphase shift:<1%; 2.Over-zero protection: 0.2 V AC; 3.AC switching: 50Hz /60Hz.
- Stack using---Such as:.4 micro inverter of 260W stacking can achieve 1040W. the number of the stacking is unlimited.
- DC input--Input voltage range:22V to 50VPV Panel: Recommend using the power more than 30W and the standard voltageof 36V PV panels.Suggestion making the PV in parallel. AC output---220VAC: 180v- 262V,50HZ; 110V AC: 80V - 160V,60Hz.
|
|
|
|
|---|---|---|
|
|
|
|
Single-phase grid connection & Three-phase grid connection
Micro Inverter Installtion NOTE
For Micro Inverter, its installation location is very important,We strongly recommend that the inverter be installed in a very ventilated environment, or a fan can be installed around the inverter to ventilate and dissipate the working environment temperature for better operation. Due to the waterproof design, the machine is relatively sealed, although the use of a metal shell can better dissipate heat, but the inverter will continue to generate a lot of heat when inverter running at full power, when the Micro inverters temperature is too high, for safety, the inverter will reduce the power to work or stop working until the inverter temperature is down to safe range.