[11 & 64 in]
[3 & 16 in]
[3 & 32 in]
[5 & 16 in]
[1 & 4 in]
[1 & 16 in]
[5 & 32 in]
[1 & 8 in]
[9 & 64 in]
[5 & 64 in]
[7 & 64 in]
|
|
|
|
---|---|---|---|
Premium M2 High-Speed SteelMade from premium M2 high speed steel, perform better than other general purpose 4241 high speed steel and 4341 high speed steel, because of its well-balanced toughness. |
135° Split PointBest for portable drills. Reduce drill walking, require less force than 118° point. |
Straight ShankStraight shank fits most common drill chucks. |
For Medium and Softer MaterialsOffer best durability and speed for repetitive drilling in medium and softer materials, soft metal, PVC and wood. |
Drill Hulk titanium-coated drill bits are made from premium M2 high-speed steel and are coated with titanium nitride.
Offer best durability and speed for repetitive drilling in medium and softer materials, soft metal, PVC and wood.
Made in China
You Will Get:
12 pieces of 1/8-inch. x 2-3/4-inch. titanium coated drill bits with case
Notice:
For high-speed drilling through metal, lubricate the bit with lightweight oil.
Warning:
Drill bits can shatter during use.
Always wear safety goggles and safety items when drilling.
California Proposition 65 Warnings: California requires the following notice: WARNING: Some dust created by power sanding, sawing, grinding, drilling, and other construction activities contains chemicals known to the State of California to cause cancer and birth defects or other reproductive harm. Some examples of these chemicals are: lead from lead-based paints, crystalline silica from bricks and cement and other masonry products, and arsenic and chromium from chemically treated lumber. Your risk from exposure to these chemicals varies, depending on how often you do this type of work. To reduce your exposure, work in a well-ventilated area and with approved safety equipment, such as dust masks that are specially designed to filter out microscopic particles.
DHTI25 | DHCO25 | DHHEX25 | DHBK25 | DHCO13 | |
---|---|---|---|---|---|
Drill Diameter | 1/8 inch | 1/8 inch | 1/8 inch | 1/8 inch | 1/16 - 1/4 inch |
Overall Length | 2-3/4 inch | 2-3/4 inch | 3-1/2 inch | 6 inch | Set |
Material | M2 High Speed Steel | Cobalt Steel | M2 High Speed Steel | M2 High Speed Steel | Cobalt Steel |
Shank Type | Straight | Straight | Hex | Straight | 3-Flat Shank on 3/16 inch and larger |
Best For | Medium and Softer Materials, Soft Metal, PVC and Wood | Hard Metal, including Stainless Steel | Medium and Softer Materials, Soft Metal, PVC and Wood | Deep Drilling in Medium and Softer Materials, Soft Metal, PVC and Wood | Hard Metal, including Stainless Steel |