Feature(may vary by option.)

●★ 【6 Pack 】You can get a set of 6Pcs stubby drill bits of metric size M3 M4 M5 M6 M8 M10. Size: 1/4inch (6.35mm) hex shank. Standard sizes. Short size is not easy to shake and can drill accurately. Each tap drill is engraved with its size convenient for you to choose the suitable size with a glance.
●★ 【High Quality Materials】Combination drill tap bit is made of high quality High-Speed Steel (HSS)4341+ titanium coating. High speed steel is designed to ensure sharp, fast execution and withholds strength and efficiency.
●★ 【Multifunction】High-speed steel titanium coated multifunctional hexagonal shank tapping, drilling and chamfering integrated spiral composite tap. Drilling, tapping and cutting are three in one, suitable for light metal, aluminum, carbon steel, copper, thin wood, plastic board and other materials
●★ 【High Efficiency】This metric drill tap bits set can be processed in one step, greatly saving processing steps and time costs, and improving work efficiency. 1/4 inch Hex Shank fits into all power tools more easily and securely, especially for tapping machine. Drilling speed, chip back quickly, prevent sticking.
●★ 【Reliable After-sales Service】 If you have any dissatisfaction or questions, please contact us. We will process it within 24 hours until you are satisfied, please rest assured to buy.

[Metric Tap Drill Set]





Description

3 in 1 Combination Drill and Tap Set3 in 1 Combination Drill and Tap Set

Specification

Size: M3*0.5, M4*0.7, M5*0.8, M6*1.0, M8*1.25, M10*1.5
Material: High Speed Steel (titanium coated ),Cobalt
Shank Type: Hex
Tool Flute Type: Spiral
Shank: 1/4 inch（6.35mm）
Length: 56mm (The golden ones are shorter in length than the silver ones.)
Pitch: 0.5mm, 0.7mm, 0.8mm, 1.0mm, 1.25mm, 1.5mm
Package Includes: 6pcs Combination Drill and Tap Set

Hex Shank Hand Tap HSS Drill Tap BitsHex Shank Hand Tap HSS Drill Tap Bits

Hex Shank Hand Tap HSS Drill Tap BitsHex Shank Hand Tap HSS Drill Tap Bits

Drill Tap BitsDrill Tap Bits

A tapered end on hex shank can prevent excessive knocks; Back taper exceeds the tap to prevent over-drilling and damage to the thread. Drilling speed, chip back quickly, prevent sticking.

1/4 inch Hex Shank fits into all power tools more easily and securely, especially for tapping machine. These taps are used on a machine to do the tapping, generally more accurate because human error is eliminated.

They are taps with drilling function, used to drill a hole and cut new threads at the same time, you will have a smooth tapping experience with them.

Note: This titanium coated drill tap bits is best for thin metal through-hole tapping with a thickness of 3mm-5mm.

3 in 1 Combination Drill and Tap Set3 in 1 Combination Drill and Tap Set

Kind Tips:

  1. Blind holes are not available, non-standard angle iron channel steel, with more impurities should be used with caution.
  2. The speed of the drilling feed should not be too fast, and do not press hard, so as not to break, and must not be operated with brute force.
  3. Keep the drilling speed low during processing, the larger the diameter, the slower the drilling speed.
  4. In case of insufficient torque, it is recommended to withdraw and then use an electric drill to tap gradually.
  5. It is easy to use, but you must be careful when pouring out. Due to the characteristics of the material, it is easy to break if you are not careful, which is a product feature.
  6. Drill Tap Bits are industrial consumables and are subject to wear and tear. Pay attention to daily maintenance and cleaning.
  7. The composite wire adopts standard 1/4 hexagonal shank, which is suitable for all kinds of hand drills, bench drills, tapping machines and battery drills. (Do not use impact gear)
  8. If the hand drill/rechargeable drill cannot adjust the speed, it is recommended to replace the equipment.

Titanium Coated Drill Tap BitsTitanium Coated Drill Tap Bits