The universal model is suitable for all electric drills/impact drills
This product is installed on an electric drill and uses the power of the drill to drive a circular gear cutter to cut metal sheets
Outer edge and pair of circular tooth cutter head
The inner edges of the circular cutterhead fit together to form a cutting edge, achieving the cutting of the iron sheet. The cut iron sheet is sent out along the rotation of the secondary circular cutterhead, and the cutting effect is flat and free of burrs.
Scope of application: 12V-21V charging drill
Maximum shear capacity: Iron plate 0.8-1 mm, white iron sheet 1-1.2 mm, steel plate 0.8-1 mm, copper plate 1.5 mm, aluminum plate 1.5 mm, slightly inferior shear capacity when using a 12V charging drill, stronger shear capacity when using a 21V charging drill - precautions: This product is suitable for cutting flat metal sheets below 1 mm, and cannot cut plates with bends, ribs, If there is any jamming during cutting, it cannot be cut, Adjusting the electric drill to reverse can automatically retract.