Feature

●LONG-LASTING BOND STRENGTH: Our metal epoxy glue is of good quality, your repaired products will last for at least one year. Once cured, metal repair glue can form a strong and stable permanent bond. Compared with traditional epoxy, AB epoxy glue is high adhesion and good hardness, and a certain toughness.
●WIDE APPLICATION: Our metal repair glue is suitable for repairing bonding metals, ceramics, glass, and many plastics. It not only can be used to repair fuel tanks, plumbing, concrete breaks, water tank, and plastic bucket but can be used for boats, cars, fuel tanks, heaters, vases, fence welding car bumpers, and motorcycle crack repair.
●SAFE AND CLEAN: Our metal to metal glue is a clean, odorless, and environmentally friendly product. We insist on the production of exclusive metal glue formula. We take environmental protection as the concept, to ensure that your repaired products are safe and clean.
●SIMPLE TO USE: The way to use our metal glue heavy duty is very simple. First, please make the surface clean before the process. Then, Use the pusher to push out the appropriate amount of glue at a 1:1 ratio on a flat surface, and use the stirrer to mix it evenly (usually 5 minutes, if not, it will affect the bonding effect). Last, apply it to the surface and give it 24 hours for full curing.
●COMPLETE ACCESSORIES: Our metal glue has a complete set of accessories, including A and B metal adhesive (80g*2), disposable gloves*2, wooden stirring rod*4, stirring plate*2. Quickly repair damaged areas, the complete kit is more convenient to use and less likely to get dirty hands or other parts of the home.

Description

Busted Water Pipe? Water Heater Leaking Water? Repair Mechanical Parts?

Our Metal Heavy Duty Glue can help you!

Teenanseen Metal Epoxy Glue has the consistency of mayonnaise and can be used in all applications as a filler for metal, plastic, wood, and products! Accepts oil based and water based materials.


Step 1 Make sure the surface of the sticking area is dry and free from oil stains, and the surface can be easily polished with a file and sandpaper.	Step 2 Install the push rod and squeeze an equal amount of glue A and B from the two tubes to the stir plate.	Step 3 Mix the metal glue evenly with a wooden stick (the mixed glue should be used up within 20 minutes).	Step 4 Smear the mixed epoxy resin glue evenly on the surface to be bonded, fix it and wait for more than 24h.

Note:

1、The glue must be completely mixed before use, otherwise it will seriously affect the use of the effect.

2、Keep away from children, use in a ventilated environment, it is recommended to wear protective gloves.

3、If the metal epoxy comes into contact with the skin, please wash it off with soap.

4、In case of accidental contact with your eyes, please rinse with plenty of water and seek medical attention as soon as possible.

5、Metal epoxy glue is not necessarily suitable for all materials, please conduct a small-scale test before mass use.

Package include:

2×Metal Epoxy Glue

2×Disposable Gloves

2×mixing plate

4×Stick

Busted Water Pipe? Water Heater Leaking Water? Repair Mechanical Parts?

Step 1

Step 2

Step 3

Step 4

Brand in this category on Amazon

Whats in the box