Feature
●🤩【High Efficiency】This high-powered foam cutting machine features electric wire cutting which provides fast, accurate, flat cuts and clean edge sealing to increase your productivity
●🤩【Precise Cutting】The worktable is thoughtfully designed with scales on all four sides making it easy for you to accurately measure each piece of material. The 0.01in heating wire design allows for more accurate cutting and less error, as well as a lower loss ratio
●🤩【Easy to Install】Thanks to its simple construction, the complete range of accessories, and the instruction manual, you can easily install it in a short time
●🤩【Adjustable Voltage】The adapter has a voltage adjustment knob that allows you to adjust the temperature (0-932°F) by controlling the voltage level for cutting different materials and thicknesses and getting better cutting results
●🤩【Adjustable Support】You can change the position of the electric wire by adjusting the angle of the support to cut different shapes of material. The tilting angle allows for beveled, vertebral cuts. When the holder is 90 degrees perpendicular to the table, it can be used to cut squares, squares, and cylinders
●🤩【Easy to Clean】With its smooth and flat surface, this product is easy to clean. You can easily wipe off the dust with a damp rag
●🤩【Easy to Carry】Its small size(15.35*12.99in) and lightweight(6.6lbs) make it easy to take with you when youre on the go
Description
Details
Guiding Rule: It is equipped with a stainless steel guiding rule to assist you in making straight cuts. The side fixing nuts hold it firmly to the table and prevent it from shifting
Wire Storage Wheel: The large wire storage wheel can store up to about 20m/65.61ft of heating wire, so you can cut for longer periods of time at once without having to replenish the wire frequently
LED Display: The adapter has an LED display that shows the voltage value in real time for better control of the cutting process
Circular Die: The circular die assists in round cutting and produces a more regular circle, which makes cutting easier
Adjustable Feet: There are four adjustable feet on the bottom of the worktable to ensure stability even on uneven surfaces. At the same time, it prevents the table from being scratched
Package Included
- 1 * Worktable
- 1 * L-shape Conductive support
- 1 * Guiding Rule
- 1 * Circular Die
- 1 * Angle Board
- 1 * Adapter
- 1 * English Manual
- All Accessories for Use
Application
- The foam cutting machine is used to cut foam, sponge, pearl cotton, and other hot-melt materials with a melting point below 350℃. It can cut angles, cylinders, sharp cones, rings, tapers, straight lines, and other shapes
How to Install
1. Take out the semicircular angle board, align two holes on the angle board with two holes on the worktable, and tighten them with screws
2. Take out the L-type stainless steel square pipe support, and align two holes on the pillar with two holes on the angle board. Put on the bolt, cover the copper nose (copper nose is conductive zero line, and very important), and tighten the nut
3. Pull out the heating wire about 30cm / 11.81in from the wire wheel
4. Thread the heating wire through the small hole of the worktable, and then make a ring on the heating wire and hang it on the spring at the machines bottom. It should not fall off
5. Rotate the aluminum alloy wire wheel on the bracket to tighten the heating wire. The heating wire is moderately tight and naturally elastic