●All-in-one pump & switch – No float switch required.Pump turns on when water level rises & shuts off when water is removed. ●Water cooled motors for long life, with anti airlock design and moisture tight seals. Heavy duty motors with stainless steel shafts and tough thermoplastic bodies. ●High quality, 100% marine grade UV stabilised white ABS plastic construction. ●Output: 750 gallons/hour, Max. recommended discharge head 3.0m. Designed to pump shower/sink water overboard or into a holding tank. ●Clear snap-on cover for easy access and cleaning, with gasket seal.
Description
All-in-one pump & float switch. No additional float switch required. Pump turns on when water level rises & shuts off when water is removed. SAILFLO shower sump pump system with multiple inlet ports for versatile usage. Clear screw-down cover and removable mesh filter for easy replacement or in the event that the pump becomes clogged with debris. Check valve on outlet prevent water back flow.
High quality, 100% marine grade UV stabilised white ABS plastic construction
Compact, full capacity automatic shower sump draining kit
750 Gallons per hour automatic pump with built-in float switch, turns on and off automatically as required
Designed to pump shower/sink water overboard or into a holding tank
Clear snap-on cover for easy access and cleaning, with gasket seal
Tight fitting lid to minimise splashing and odors
Removable mesh filter allows easy cleaning
Easy to install - Suits most
Multiple inlet ports for versatile usage: 1 x 3/4", 1 x 3/4" or 1" x1", 1 x 1-1/8" or 1-1/2"
Outlet discharge hose: 3/4"
Check valve on outlet
Ignition protected
Ideal for use in boats, RV, caravans, motorhomes, and camper trailers
Includes mounting/operating instructions
Mounting screws not included
Security:
The shower sump pump may not be used for other liquid than water/bilge water.
Always install the pump with black lead negative(-) and brown/brown white lead positive(+)
Always use the fuse required.
The wire connections must be sealed with a marine sealant.
All electrical wiring must be clamped with the connection well above the bilge water level. Do not remove the insulation more than necessary. All wiring connections should be sealed with a marine sealant oxidation.
Do not run dry.
Brief content visible, double tap to read full content.
Full content visible, double tap to read brief content.