Feature
●【Function】: You will very likely need this motorcycle coil spring compressor tool if you want to service the shock on your motorcycle. As shown in the video demo, with the help of this tool, you can easily compress the shock within minutes, why pay expensive shops, when you can have this handy tool!
●【Application】: This coil spring compressor tool is only designed to be used on most dual shock motorcycles with smaller capacity springs.
●【Components】:The kit includes: 1 pair of coil spring compressors, made of square stainless steel housing with alloy steel bolts.
●【Accessories】: Comes with four plastic spare inserts which helps to protect the colored spring coating from damage
●【Your Satisfaction Is Our Goal】: We are confident that this Coil Spring Compressor Tool kit is the most cost-effective one to get your job done, if you are not 100% satisfied, just contact us, we will work the issue out with you until you are 100% satisfied
●【Our Mission】: Our mission is to help motorcycle enthusiasts with quality and affordable motorcycle repair tools, so you dont have to pay shops to do the maintenance and repair jobs done on your beloved motorcycles!
Description
Highlights
You will very likely need this motorcycle coil spring compressor tool if you want to service the shock on your motorcycle, this set of
coil spring compressors is made of square stainless steel housing with alloy steel bolts.
Claw jaws are made from forged chrome alloy,
Overall Length: 160mm
Working Range: 20~100mm
Use with 17mm wrench or 3/8"Dr. Ratchet Handle
Warning: this tool is only designed to be used on dual shock motorcycles with smaller capacity springs .
It is not to to be used on mono shocks of any type , not to be used on ATV , dirt bike or off road dual or single shock suspensions.
Instructions:
- Open both compressors (by adjusting the bolts on the top of the compressor to adjust the distance of the claws), so the hooks can grab as many coils of spring as possible. The more coils they can grab, the easier the job will be.
- Position each compressor on the spring opposite of one another as shown in the pic.
- With a wrench on one hand, hold the compressor body over the top hook area (hook next to the hex bolt head).
- Tighten the compressor using a 17mm wrench or a 3/8” ratchet with the other hand, make a few turns on each compressor, so that each compressor compresses the spring equally.
- Compress the spring far enough to remove the retaining collar.
- Loosen each compressor evenly with the wrenches.
Tips:
1. Before each use, make sure to apply grease to the bolt threads and the washer underneath the bolt head.
2. When using the wrench to tighten the compressor, make sure you tighten both sides one at time with small adjustment, do not overtighten one side at a time, which will cause damage to the spring and the tool.
|
|
|
|
|
|
|
|---|---|---|---|---|---|---|
| Motorcycle auxiliary gas tank | Motorcycle vacuum sync gauge | Motorcycle fork seal driver | Motorcycle clubman handlebar | Motorcycle Fork Seal Driver Tool | Motorcycle Cam Chain Breaker | |
|
|
|
|
||||
| Customer Reviews | 841
| 764
| 291
| 202
| 384
| 410
|
| Price | $42.35 | — | — | — | $55.80 | $29.32 |
| Application | Universal | Universal | Universal | for 7/8" application | 35mm 36mm 40mm 41mm 42mm 43mm 45mm 46mm 47mm 48mm 49mm 50mm | Universal |
Check out our store for more motorcycle tools and parts!
