![Dent Removal Kit for Cars](https://images-na.ssl-images-amazon.com/images/G/01/x-locale/common/grey-pixel.gif)
HOW Dent Puller Kit WORKS
1. Clean the damaged surface with a clean wet cloth.
2. Insert the glue stick into the glue gun, then heat it for about 3-5 minutes.
3. Choose a suitable puller tab and apply hot melt glue on it.
4. Put the puller tab on the dent, hold on, and wait for a minute until the hot melt adhesive sets.
5. Use a T-bar or Bridge dent puller to pull up the dent. Repeat the above steps until the dent pops up.
6. Spray 75% rubbing alcohol all over the residual glue, wait for 1-3 minutes. Peel it off or remove it with a plastic shovel.