How to Remove the Dent?
1. Clean up the dent and make sure the cars paint is undamaged.
2. Insert the glue stick into the 20W glue gun, then heat it for about 2-5 minutes until the glue spill out from the glue gun.
3. Choose a tab and apply hot melt glue on it.
4. Put the tab on the dent, hold on and wait for 2-3 minutes until the hot melt glue is a clod.
5. Use a T-bar dent puller to pull up the big dent. Repeat the above steps until the dent pop up.
6. Use a dent lifter and adjust its height to repair small dents.
7. Spray 75% rubbing alcohol all over the residual glue. Wait for 1-3 minutes.
8. Peal it off or remove it with a plastic shovel.