Feature(may vary by option.)
●XTC-3D does not melt plastic. Two liquids are mixed together and brushed onto any 3D print, fabric, wood, and more.
●Coating self-levels and wets out uniformly without leaving brush strokes.
●1 oz covers 100+ square inches. 90% Time & Labor Savings means the need to post finish is almost eliminated.
●XTC‑3D can be mixed with metal powders, SO-Strong tints, and Ignite or UVO pigments making adding colors and metal effects easy.
[1.5 Pound (Pack of 1)]
[6.4 Oz. Unit]
Description
XTC-3D High Performance 3D Print Coating
Protective coating for smoothing and finishing 3D printed parts that does not melt plastic. XTC‑3D fills in 3D print striations and creates a smooth, high gloss finish. The need to post finish is almost eliminated. XTC‑3D can be applied to both SLA and SLS prints. It works with PLA, ABS, Laywoo, Powder Printed Parts and other rigid media such as EPS, EPDM and urethane foam as well as wood, plaster, fabric, cardboard and paper.
Inexpensive to Use
1 oz covers 100+ square inches. 90% Time & Labor Savings means the need to post finish is almost eliminated. XTC‑3D can be mixed with metal powders, SO-Strong tints, and Ignite or UVO pigments making adding colors and metal effects easy.
Coat any 3D Print Surface
XTC-3D does not melt plastic. Two liquids are mixed together and brushed onto any 3D print, fabric, wood, and more. Coating self-levels and wets out uniformly without leaving brush strokes.