Feature(may vary by option.)
●Material: Bearing Steel ；Block Model: MGN12H carriage ；Rail Guide Length:500mm/ 19.69"" (20 holes）.
●Two rubber stoppers on each side of the linear rail, it can prevent the carriage block from falling out.
●Product Features: Made of Bearing Steel with low friction coefficients , good surface finish, uniform hardness, high load, smooth operation and low noise
●Widely Used：Linear Rail Guide widely used in devices for the manufacture of semiconductors, printed circuit boards, IC packages, medical devices, robot arms, precision encoders and other small linear motion devices.
●What You Get: 2Pack 500mm Linear Rail Guide with 2pcs MGN12H Carriage Block（Blocks are pre-loaded ）. 30-Days money back guarantee, 1-Year warranty, 24/7 friendly customer service.
[350mm MGN12H+ 1 Carriage Block]
[400mm 2Pack x (MGN12H+ 1 Carriage Block)]
[500mm 2Pack x (MGN12H+ 1 Carriage Block)]
[500mm MGN12H+2 Carriage Block]
Description
Material: Bearing Steel
Block Model: MGN12H carriage
Rail Guide Length:
250mm/ 9.84"" (10 holes）、300mm/ 11.81"" (12 holes）、350mm/ 13.78"" (14 holes）、400mm/ 15.75"" (16 holes）、450mm/ 17.72"" (18 holes）、500mm/ 19.69"" (20 holes）
|
|
|
|
|---|---|---|
High quality materialThe guide rail is made of high-quality bearing steel stainless steel, and the surface is electroplated with anti-rust treatment. It has the characteristics of anti-corrosion, anti-rust and high hardness. It can pass the 48-hour salt spray test and has a longer service life. |
Smooth and unimpededThe slider ball made of high quality solid steel ball,more steel ball rows, reduce friction, light and flexible, smooth and unimpeded, longer service life. |
High load, high precisionGothic four-point contact design, can bear loads in all directions, with strong stiffness, high precision characteristics. |
Note that the rail matches the slider
Buying sliders or guide rails separately may affect the smoothness and accuracy, so it is recommended to buy sliders and rails together.
Points for Attention in Use
Prevent the slider from separating from the rail
The two ends of the guide rail have been plugged with anti-slip rubber stopper to prevent the drop of steel balls caused by the sliding block falling off. Before installation, please ensure that the packaged parts are not falling off. The recombination of the parts after separation may affect the smoothness of operation.
Do not unload the slider unless necessary
When installing the linear guide, do not unload the slider unless necessary. If the slider needs to be removed from the guide or installed, please use the clip rail to do that.
|
|
|
|
|
|
|---|---|---|---|---|---|
| 2020 V Aluminum Profile Extrusion Linear Rail | 8mm Lead screw T8 nut | Linear motion rods | Aluminum Linear Rod Rail Shaft Support | Aluminium Plum Flexible Shaft Coupling | |
| Type:2020V/2040V | ✓ | ||||
| Lead:2mm/8mm | ✓ | ||||
| Diameter:6mm | ✓ | ✓ | ✓ | ||
| Diameter:8mm | ✓ | ✓ | ✓ | ✓ | |
| Diameter:10mm | ✓ | ✓ | ✓ | ||
| Diameter:12mm | ✓ | ✓ | ✓ | ||
| Diameter:5mm | ✓ | ||||
| Diameter:6.35mm | ✓ |