Feature

●🚙DOOR MIRRORS FITMENT- 2003- 2006 For Chevy Silverado Suburban Tahoe For GMC Sierra Yukon(2007 Classic)
●🚙MULTIFUNCTION- Manual Folding Non- extended, Glass are Power adjustable,with heated defrost function
●🚙IMPORTANT NOTE- This mirrors is designed to replace an original mirror with these exact options. If you do not have the options listed, there is a possibility that this mirror may not function properly
●🚙UPGRADED MIRRORS – The door mirrors provide better and wider angle of rear view, improves visibility and reduces blind spot. Upgrades on road safety
●🚙WHAT YOU GET- A Pair of Door Mirrors(Include Left Side and Right Side) and 1 Year Warranty


Description

11
11

Fit for

2003-06 For Chevy Silverado 1500

2005-06 For Chevy Silverado 1500 HD

2007 For Chevy Silverado 1500 HD Classic

2003-04 For Chevy Silverado 2500

2003-06 For Chevy Silverado 2500 HD

2003-06 For Chevy Silverado 3500

2000-05 For Chevy Suburban 1500 2500

2003-06 For Chevy Tahoe For GMC Sierra 1500

2003-06 For GMC Sierra 3500 Yukon

2000-05 For GMC Yukon XL 1500 2500

Package Including

  • A pair side view mirror

POWER ADJUSTED

This is a power mirror, you can adjust the angle of the mirror through the car power switch to maximize the field of view. This power mirror can greatly improve the drivers convenience, allowing the driver to adjust the exterior mirror without further operation due to long distances.

11

Replacement Side View Mirrors

Step 1 - Access

Roll down the window of the car. For electric mirrors, disconnect the negative battery terminal after this.

Take off the screws of the door panel then take off the trim with a pry tool and and finally take off the door panel. If you have electric windows, unplug the harness. Use the nut driver to take off the nuts holding the side mirror in place and then take off it.

Step 2 - Installation

If it’s an electric mirror, replace the harness, checking that everything is properly hooked up. To complete the installation, screw the interior door panel back in place on the door and replace the trim. Put the negative battery cable back on the terminal and tighten properly.

Put side view mirror in place so that the bolts on the mirror are through the holes in the assembly. Tighten the nuts with the nut driver until the mirror is held firmly.

11

Product information