Feature(may vary by option.)

●Saves 1/3 wood loss on each cut.
●Feeds easily when used for moderate rips and crosscuts on a table saw.
●Reduces "JUMP IN" for better "PULL-CONTROL".Kerf: 0.90 inches. Std Bore: 0.625 inches
●Eliminates bottom splintering on RADIAL CROSSCUTS.
●With new 30° ATB tooth style this blade stops totally, ALL bottom and top splintering on ply veneers on both radial and table saw machines

[D 10 | T 24 & 4 | K 29 & 32 | A 1 | TS Dado]

[D 6 | T 24 & 4 | K 29 & 32 | A 5 & 8 | TS Dado]

Description

From the Manufacturer

Forrests blades offer a superior cut that leaves a rip-cut saw edge that is as smooth as if it had been sanded, and a cross-cut edge that is almost mark-free. The blades run very quietly, and backside tearout in plywood is negligible. Each blade is virtually hand-made. The plate is hand-tensioned (up to 15 minutes per blade), superior C-4 carbide teeth are hand-brazed to the plate, and the blade is straightened and restraightened multiple times throughout the process. Think of a Forrest blade as a tool in your shop, not an accessory. Forrest stands behind its blades by offering a sharpening service that bring blades back to the exact tolerances offered in a new blade. And this same exacting service is available for other manufacturers blades as well, so they should come back better than new. Forrest Woodworker 1 Saw Blade For Radial and Table Saws. These trim and cross-cut ALL PURPOSE blades give scratch-free POLISHED cuts on wood, RIP or CROSSCUT, up to 2" thick. They have a 30° Alternate Top Bevel with a 5° Face Hook on 10" diameters and smaller.