[E500]
[E700]
[E1000]
Micro3 is not just an evolution, its a re-V-olution! The new V-shaped track design is inspired by the popular car modification culture - Hellaflush. Just like those modified cars with negative camber and lowered suspension, the Micro3 slider has exterme low centre of gravity and the ability to handle very high payload.
|
|
|
---|---|---|
Hellaflush Design, 4 KG PayloadInspired by the design of Hellaflush car modification, Micro3 uses a new 45-degree angled track design. It disperse weight to both vertical and horizontal direction, resulting in a stable platform with amazing 4 kg payload limit in any direction and the horizontal load is up to 12 kg. |
Vacuum Adjustable DampingThe vacuum structure combined with special damping grease not only provides a solid damping smoothness, but also allows stepless adjustment of the slider movement resistance. The damping setting can be adjusted between 1 and 5. The higher the number, the higher the resistance. |
Fast Switching MotorThe slider body and motor are independent and driven by a high-strength stainless steel Arri gear. The motor can be integrated and removed easily by using the quick release screws. It’s effortless to switch between a manual and motorised slider to handle different shooting conditions. |
|
|
|
---|---|---|
Triple Support SystemThe stress point of the tripod support rods has been shifted from the center of the slider to the support components at both ends where standard 1/4" and 3/8" screw ports are added as well. |
Car FilmYou can have the Zeapon Micro3 mounted upside down or you can mount the Micro3 on a car easily. |
Support Rods equippedThe entire Micro3 Series sliders come with tripod support rods, no need to purchase them separately. |
|
|
|
---|---|---|
All-round BeltThe Zeapon Micro3 comes with many improvements and upgrade that addressed every single area. The belt lock uses a large-diameter mechanical knob, no need to worry about damaging the belt or triggering it by accident. |
Nesting Screw With Hidden DesignZEAPONs unique nesting screw is compatible with both 1/4 and 3/8 inch standard, just press the screw and rotate it slightly, then the screw can be fully hidden to avoid scratching other devices and camera bags. |
Large Mounting BaseThe mounting base of Micro3 is approximately three times the size of the previous generation, it significantly increased the contact surface and allows your camera to be installed more securely and improves the stability. |
|
|
|
---|---|---|
Direct Power SupplyWhen your battery runs out of power, or you need extreme long shooting time, you could power the Micro3 using either a power bank or a power adapter with 5V and 2A standard. |
Powerful Weapon of Macro PhotographyThe extremely smooth of the Micro3 will fearlessly amplify the probe lens against jitter. Double distance slide can hide itself extremely well, so that the equipment is not easy to out of camera wear. |
Vertical filmingMicro3 series slider powerful motor allows you to film vertically, 4kg payload actually takes a huge advantage in most gear setups. |
|
|
|
|
---|---|---|---|
Waypoints setupUsing Zeapon lab to set the waypoints and speed up your motorized slider. |
Easy connectionWith one click, your slider is ready to work, once connected you can operate the slider within 15 meters wirelessly. |
Timelapse modeStart a timelapse, just this simple, connect shutter release cable with slider, and you are good to go! |
Stop motionMore functions wait for you to explore! |
Micro3 Motorized E500 | Micro3 Motorized E700 | Micro3 Motorized E1000 | |
---|---|---|---|
Customer Reviews |
3.9 out of 5 stars
13
|
3.9 out of 5 stars
13
|
3.9 out of 5 stars
13
|
Price | $599.00$599.00 | $649.00$649.00 | $729.00$729.00 |
Travel Distance(the length is occupied when slider from one side to the other) | 27 inches | 30 inches | 42 inches |
Slider Length | 18.9 inches | 22 inches | 28 inches |
All angled Payload (horizontal) | 4.5kg (12kg max) | 4.5kg (12kg max) | 4kg (12kg max) |
Net WT. | 3000g | 3150g | 3400g |
Motorized | ✓ | ✓ | ✓ |