Installation instructions:
1.Take out the pin of your hook and take the hook off the cable.
2. Just install the rope or cable between the two halves, no need to take the sythentic rope sleeve or any lube for the steel cable, thanks to the two-pieces design.
3. Insert four bolts and tighten them up with the Allen wrench comes together in the package.
4. Put the hook back to the end of the cable or rope. contact the clutch and the shrink on the axle, until the hook is on the hook and the ball.
5.Please position the hook stopper at approx. 3/4 of the total line distance towards the hook while using your winch.
Feature:
Eliminates wear and tear on your rollers from the hook
Eliminate the hook clatter from going down the trail
Protects the winch motor and gears from pulling the cable in to far and bottoming out on the rollers
Fitment: For use with cable up to 1/4"" (dia.)steel roller fairleads/ aluminum hawse fairleads,great fits between the 2 outside rollers on an ATV or UTV winch fairlead.
Material: Rubber
Color:Black
Warm tips: If you are using steel cable, please wear gloves during installation to protect your hands.
Package Includes: 1x Winch Stopper