Feature(may vary by option.)

●Shaft Size: 3/4" Diameter, 2-3/8" Long, end tapped with 5/16"- 24 UNF; Keyway 3/16"; Mounting pattern 6.40" L x 2.95" W - 3.17" W.
●Powerful Engine: EPA compliant, max torque 8.1 ft.-lb @2500 RPM, Max 3800 RPM speed, 7 horsepower, 0.88 gal fuel tank.
●Replacement: For 6/6.5/7/7.5 hp Honda/Yamaha/Kohler/Briggs & Stratton/ Engine, applicated with cement mixer, compressor, log splitter, vacuum, water pump, chipper shredder etc.
●Industrial Grade: Provides powerful strength to get the job done, Fuel Shut Off and gas saving overhead valves. Easy-reach recoil starter system with auto-decompression.
●Kindly Noted: It may touched oily, as oil tested before packaging, 100% new. (engine oil Not included)

[173cc]




[301cc]




[212cc]




[420cc Electric Start]




[79cc]





Description

22
33

BILT HARD 212cc OHV Gas Engine

Why Choose US?

  • Upgraded engineering and construction for improved lifespan.
  • Durable cast iron cylinder withstands wear and abuse.
  • User-friendly controls for easy starting and operation.
  • Low oil sensor shuts down engine when oil reaches a level that is too low for safe operation.

Replacement Model

Our Engine replacement for Hon-da GX120-118cc, GX160-163cc, GX160-163cc, GX200-196cc, Briggs-Stratton XR750-163cc, XR950-208cc, Koh-ler RH255-196cc, RH265-196cc, CH260-208cc,CH270-208cc, Ya-ma-ha MZ175-171cc, MZ200-192cc, Ka-wa-sa-ki FJ130D-133cc,FJ180D-179cc.

Product Parameter

  • Maximum Torque: 8.1 ft. lbs. @ 2500 RPM
  • Compression Ratio: 9.0:1
  • Bore × Stroke: 70mm*55mm
  • Fuel Type: 87+ octane stabilizer treated unleaded gasoline
  • Shaft length (in.): 2.43 in. / 61.7 mm
  • Shaft Diameter: 3/4 in. / 19.1mm
  • PTO Shaft Keyway: 3/16in/4.76mm

zz

xx

cc

Horizontal Installation

The horizontal shaft is ball-bearing mounted, making this gas engine an ideal replacement for most standard engine configurations.

3/4 in. Shaft

The Counter clockwise Rotating PTO Driveshaft is 3/4" and is support by reliable Steel Ball Bearings.

Control the Air Volume

When the engine is cold-started, part of the air intake ports should be properly closed to increase the gasoline concentration of the mixed gas entering the cylinder.

33

Engine Starting Guide

212cc engine start guide212cc engine start guide