Feature

●TECHNICAL PARAMETERS: Incremental cable encoder has 0.25%FS linearity, 0‑5K ohm output, range 10‑1200mm, voltage DC8‑24V, main body outer diameter: 38mm / 1.5in, central shaft diameter: 6mm / 0.24in.
●OPERATION MODE: Draw wire encoder adopts efficient linear displacement measuring device, push pull output, side out line. is widely used in water conservancy, steel industry, has a large choice space.
●STABLE PERFORMANCE: Encoders are suitable for all kinds of environments. They are widely concerned for their small size, excellent performance under bad conditions, accurate, flexible and simple installation.
●WIDELY USED: Applicable to cylinder, testing machine and other industries, air pipe production equipment, printing equipment, automatic welding machine, automatic encoder, ink jet machine, robot and so on.
●SATISFACTION GUARANTEE: All our product offer return policy or money back guarantee, if you have any problem about your purchase, pls feel free to communicate with us by Email, we are always here to make everything right for you.

Description

Specification:
Item Type: Draw Wire Encoder
Range: Approx. 10 ~ 1200mm / 0.39 ~ 47.24in
Voltage: DC8-24V
Output: Push pull output
Cable Length: Approx. 1.5meter / 4.9ft
Main Body Outer Diameter: Approx. 38mm / 1.5in
Outgoing Mode: Side outgoing mode
Central Shaft Diameter: Approx. 6mm / 0.24in
Operating Temperature: -25℃~+85℃
Voltage: DC5-24V

Package List:
1 x Draw Wire Encoder

Note:
1. During installation, the cable should be vertical to the encoder, and the cable should not rub against the outlet.
2. Do not loosen the cable connector after it is pulled out; otherwise, the sensor may be damaged. Do not exceed the total length of the wire when pulling.