With all the dangerous solvents, strippers and other chemicals available to clean your cars parts, sometimes all thats needed is water and some high pressure.

The Eastwood Liquid Media Blaster is specifically designed to use high pressure water from a gas-powered pressure washer as a source for powerful dust-free abrasive blasting. With this sturdy attachment, you can tackle tough cleaning jobs without the use of elbow grease. Strip old paint away, clear out rust or clean off grime from metal or concrete easily. You wont need a compressor, and you wont have to worry about heat buildup on the surface.

• Powerful dust-free abrasive blasting.
• Efficient siphon feed gun.
• Removes paints, coatings and loose rust.
• Replaceable wear components.

It features an efficient siphon feed gun with replaceable wear components. The Eastwood Liquid Media Blaster provides a dust-free method to strip away old paint and coatings, body fillers, accumulated dirt and loose rust leaving a clean, bare metal surface ready for damage repair or painting. It will also work with media of 30 grit or finer.

Contents

(1) Brass Blast Gun Assembly with 4mm Nozzle installed.

(1) Double Pick Up Tube.

(1) 23’ [7m] x 1/2” [1.27mm] I.D. Reinforced Clear Vinyl Suction Hose.

(1) 3/8” Male Quick-Disconnect, High Pressure Water Fitting.