Mix Ratio by weight: 100:100 / Resin:Hardener Operating Temperature: -60 to 115 C Typical Applications: Automotive, Medical, Aerospace, Photonic, Assembly, industries, Also can be used anywhere that requires excellent chemical fastening to plastic parts. Viscosity @ 25 C: 3,400 Specific Gravity, mixed: 1.19 Reactive solids contents, %: 100 Pot Life: 60 minutes 1 hour: @ 65C 24 hours: @ 25C Glass transition temperature (Tg), C: 10 Hardness, Shore D: 65 Lap shear strength, psi: 2400 (Alum to Alum) Flex-Bond 70 Flexible Plastic Bonder Epoxy Adhesive, Plastic bonding is a flexible thixotropic bonding adhesive designed for bonding all types of plastics including nylon, PVC, polyethylene, acrylic, lexan, kapton or almost any thermoplastic substrate. Flex-Bond 70 Flexible Plastic Bonder Epoxy Adhesive, Plastic bonding is low viscosity and easy to apply, can cure at room temperature.Flex-Bond 70 Flexible Plastic Bonder Epoxy Adhesive, Plastic bonding is high technology epoxy was formulated for applications in the automotive, medial, aerospace, photonic and assembly industries and can be used anywhere that require excellent chemical fastening to plastic parts.For safe handling information on this product, consult the Material Safety Data Sheet, (MSDS).1) Carefully clean and dry all surfaces to be bonded.2) Apply Flex-Bond 70 Flexible Plastic Bonder Epoxy Adhesive, Plastic bonding completely mixed adhesive to the prepared surfaces, and gently press these surfaces together. Contact pressure is adequate for strong, reliable bonds; however, maintain contact until adhesive is completely cured.3) Some separation of components is common during shipping and storage. For this reason, it is recommended that the contents of the shipping container be thoroughly mixed prior to use.4) Some ingredients in this formulation provided may crystallize when subjected to low temperature storage. A gentle warming cycle of 52C for 30 minutes prio