Feature(may vary by option.)

●Typical Applications: Wearable Electronics; EMI / RFI Shielding; PCB Manufacture / Repair; Photovoltaic Cell Packaging; Solder Replacement
●Features: Carbon Filled (Non-Magnetic); Low electrical resistivity: <20 Ohm·cm; Low Cost, Low Density; Impact / Shock Resistant
●One Component System: black paste; Curing Instructions: Best results are obtained when the product is cured at the following rate: 1h 15min @ 120°C / 248°F or 30 min @ 150°C / 302°F
●Glass Transition Temperature: 88°C/ 200 °F (cured at 120°C/248 °F); Viscosity: 550 - 600 Pa·s @ 25°C / 77°F; Hardness, shore: >70 D
●Great electrical conductivity; <20 Ω·cm (cured at 120°C/ 248°F)
●STORAGE & SHELF LIFE: 6 months @ 25°C / 77°F or up to 12 months @0-10°C/32F in unopened containers. Stores and ships at room temperature. No freezing is required.

[40g Jar]

[20g Jar]

Description

G6E-9KMBP is a single component epoxy system that is developed for general purpose applications requiring a high-performance bond or connection of electrically conductive components/materials that require low electrical resistivity. The system cures at 150°C / 302°F in 30-40 minutes. It does not cure at room temperature (25°C / 77°F), so it has an unlimited working time and there is no need for it to be stored frozen. We use a proprietary mix of high-performance carbon/graphene-based additives to achieve superb electrical properties for a non-metallic electrically conductive epoxy.