●This is a new design of Engine Oil Level Dipstick Handle, made of Aluminum casting, direct replacement of the damaged plastic handle. Super Durable, never breaks down again! ●The replacement Handle is compatible with Dodge Charger Chrysler Jeep Engine Oil Dipstick Indicators, universal for the engine oil dipsticks, not for the transmission dipsticks. ●Refer to OE: 4792872AC, 4792872AC, 917-324; 04792872AE, 04792872AF, 4792872AE, 4792872AF; 04666139AA, 4666139AA, 917-320 etc. ●Package with 1x Black Aluminum Pull Handle(comes with a fluoro rubber O-ring, which better prevents leakage and has a longer service life), 1x Hex wrench 1.27*17*47mm, 1x M2.5x8mm Hexagon socket head 12.9 grade, 1x 2.5mm high-speed steel twist drill. ●Size: 44 x 35mm. Easy 2 Minutes Installation. Remove the original handle with the included tool, align the new handle, tighten the screws, and you are ready to use. If you have any questions, please dont hesitate to let us help, thank you!
[Yellow]
Description
3mirrors Aluminum Oil Dipstick Pull Handle Engine Oil Level Dipstick Handle Compatible with Dodge Chrysler Jeep Models Handle w/Viton O Ring, Yellow
2007 2008 2009 2010 2011 Chrysler Pacifica Town Country Dodge Nitro Grand Caravan 4.0L Models Engine Oil Level Indicator Dipstick
This newly designed aluminum alloy handle can replace most of the same type of plastic handle on the market, perfect fit, and more durable!
Before purchasing and installing, please confirm the compatible model, compare your original oil dipstick handle, verify the size of the hole, etc.
According to the experience of car owners, most of the broken oil dipsticks are broken from the plastic handle, now only need to replace a brand new metal handle, which will be more convenient in the future!
The oil dipstick with an ordinary plastic handle is easy to be damaged during use, so the owner has to replace the oil dipstick with a new one. Now, simply replace an aluminum metal handle and never worry about breaking it again.
Installation Tips
1. Take the old broken handle off from the Dipstick end, maybe you need a little pin to push the roll pin out.
2. Use the 2.5mm HSS Twist Drill to enlarge the 2mm hole to 2.5mm on the dipstick end. You can mark if needed.
3. Insert the end with a 2.5mm hole into the new handle, and make the two holes completely overlapped. (PS. If it cant be overlapped, just flip it 180 degrees)
4. Screw the little M2.5 Grub Screw in and fix it with the L-shape hex wrench. Its down. You can also try to pull it and make sure it is firmly.
Package with 1x Black Aluminum Pull Handle(comes with a fluoro rubber O-ring, which better prevents leakage and has a longer service life),