![8](https://images-na.ssl-images-amazon.com/images/G/01/x-locale/common/grey-pixel.gif)
How to use?
- Place under a chassis suitable for lifting.
- Turn the handle clockwise to raise the jack to the proper height.
- Confirm that the jack is in contact with the chassis, continue to move the handle and the car jacked up.
- Lift the vehicle off the tire and begin changing the tire.
- When the repair work is complete, crank the handle counterclockwise to land the vehicle smoothly.
- Crank the jack to its lowest position, remove and store.
Caution.
(Due to manual measurement, please allow 1-2% error.)
1, check to confirm the load-bearing capacity of the jack and the height of the working stroke, use must not exceed its rated load.
2, before lifting, park the vehicle on a horizontal hard road (maximum slope of not more than 6 °), the vehicle parking.
3、After confirming that the wheels on the diagonal of the removed tires are effectively stuck, loosen the nuts of the wheels to be replaced, but do not unscrew the nuts at this time.
4、Place the jack under the jacking position specified by the car factory, and use the handle to crank the jack to the appropriate height.
5, crank the handle to raise the vehicle to the appropriate height, unscrew the wheel nuts and replace the tire.
6 、After replacing the tire, hand tighten all the fixing nuts of the tire. Do not forcibly lock the fixed nuts of the