Feature

●for stage animation lights, 3D scanner printing machine
●The galvo was measured by an independent source and confirmed by the factory with PANGOLIN QM2000 card.
●Scanning speed:> 20Kpps (30K ILDA test-pattern ，±20°optical)
●20Kpps Galvo Galvanometer Based Optical Scanner Including Show Card for Animation lights
●Pls email us if you need a PDF user manual , we will reply within 24 business hours .


Description

mirrormirror

2×Mirrors

2× X + Y-Scanners

mirrormirror

effecteffect

effeff

Product Description :

Closed Loop Moving Magnet Scanner

  • Input resistance: 200K ohms, differential
  • Signal Input voltage：±5V
  • Input voltage requirements: +15V/1.0A，-15V/0.6A
  • Operating temperature range:0～50 degrees C
  • Optical angle：±30° max
  • Scanner speed:> 20Kpps (30K ILDA test-pattern ，±20°optical)
  • Mirror dimensions WxL: 7mm*11mm*0.6mm（wide wave-length）
  • Board size:7.4cm (long) * 5.0cm (wide) * 2.5cm (high)

SPECIFICATION:

Potentiometer description:

  • IS Input scale (adjusted only in factory)
  • SG Servo gain (power of the feedback signal for internal PID controller
  • LFD Low frequency damping (correct overshoot)
  • HFD High frequency damping (correct undershoot)
  • LIN Zero offset (electrical offset of the driver, adjusted only in factory)
  • PS Position scale (increases or decrease input sensitivity of the computer, DO NOT change it)

SPECIFICATION:

  • The stage laser galvo Scanner was measured by an independent source and confirmed by the factory with PANGOLIN QM2000 card.
  • Running at the desired output speed. Using the standard ILDA test pattern. Laboratory power supply at +/-15VDC,
  • room temperature. Windows PC with Pangolin,12/30k ILDA test-frame full size. 7x11x0.6mm mirror was used during
  • measuring period. The galvo is fixed in the standard mounts on an aluminium base plate, no forced cooling
  • This is a commercial product which may require ongoing and initial set-up, cleaning, maintenance and care.
  • Operational Training and tutorials are not included with purchase but support is available

galvogalvo

Packages includes :

Standard package includes(same as the picture showing) :

  • 2× X Y-Scanners
  • 1x main board （show card)
  • 1×Driver board
  • 2×Mirrors
  • 1×Scanner mount
  • 1×power supply (PUS)
  • 1×Cables driver to scanner
  • 1×Cables driver to PUS
  • 1×Cables driver to input signals
  • 2x DB25 connector

Looking for specific info?

Product information