Feature(may vary by option.)

●Application: Fits American Motors models, Chevy models, Truck models, GMC models, Pontiac models, Cadillac, Buick, Chrysler, Dodge, Pickups, Cherokee.
●Design: Precise integrated structural design, support inclined column, not suitable for telescopic. It is only 5 inches deep from the end of the spline to the top of the adapter.Please confirm whether our products are suitable for your car before purchasing.
●Feature: This hole steering wheel hub fits most aftermarket steering columns with GM 36 count splines including most Flaming River and Ididit columns.
●Material: Made of high quality billet aluminum, with black powder coated on the surface to prevent oxidation, which is not only strong but also prolongs the service life.
●Packing Include: 1 X Steering wheel adapter, 6 X small Allen bolts, 6 X lager Allen bolts, 1 X Allen wrench, 1 X metal ring, 1 X bell shaped wire, 1 X black plastic sleeve.

[Black]





Description

Feature:

Easy to install, no need to modify the vehicle, easy to use, save your time and effort.

Modify the steering wheel more stable and more durable ensure bring you a better driving experience.


Fitment:

For 1969-1994 Chevy car models except Corvette, Sprint, Spectrum, 1986-1988 Nova, 1969 Corvair

For 1974-1994 Chevy truck models

For 1982-1994 Chevy / GMC Vans

For 1969-1993 Buick,Pontiac models

For 1969-1989 Cadillac models without telescopic column

For 1970-1988 American Motors models

For 1978-1991 Chrysler, Dodge, and Plymouth Cars with a tilt column

For 1979-1981 Chrysler, Dodge, and Plymouth 2WD & 4WD Pickups, Trailduster, Ramcharger

For 1974-1995 Cherokee, Wagoneer, and pickup

For 1976-1995 CJ5, CJ6, CJ7, Wrangler, Scrambler, and Comanche


Package Include:

1 Set 5&6 Hole Aluminum Steering Wheel Hub Adapter Kit


Installation：

1.Put the spring in the plastic contact housing , then put the black sleeve through the wire and put them in the plastic contact housing.

2.Twist the black plastic sleeve so the notch fits into position on the plastic contact housing of the column .

3.Install the adapter securely over the spline shaft. Tighten the shaft nut over the adapter and securely tighten.

4.Install the steering first, then install the horn.