Feature

●The powerful bond is provided by 3M 9448 adhesive which has the excellent bond performance on a wide of substrates.
●Compatibility:Perfectly Compatible With Dell Inspiron 5368 5378 7368 7460 7569 13-5 13-7.The Decent Solution to DIY Laptop UltraBook Bumper Feet Strips:DIY for These Machines:HP Spectre,G1 13 Chromebook,Pavilion,Omen,XPS 15 9560,Surface Book
●Please Refer to Image 3 to Check the Dimension.The Strong Adhesive Ensure They Firmly Attached on the Bottom Base of Laptop or Ultrabook.Easy Use.Peel Off the Backing Films
●Package Content:4 x Bumper Feet Strips
●Install Tips:Please Clean the Groove or Surface Where the Strips Apply to.Apply the Strips onto It After the Groove or Surface Is Dry


Description

5368 Feet Kit A15368 Feet Kit A1

The Proper Feet Application Process

Inspiron 5368 Feet ApplicationInspiron 5368 Feet Application

Achieving the Max Adhesion on the Computer Cases by the Proper Applying Process

Step 1:Peel off the used or damaged feet

Step 2:Remove the rubber feet completely

Step 3:Use the Lint-free cleaning wipes, saturated with 97% isopropyl alcohol to clean the surface where the rubber feet are applied to.The cleaning surface is beneficial to achieve the max adhesion between the computer case and rubber feet.

Step4:Align the new rubber feet to the recess on the bottom base cover.Press down firmly.

Note:Please use the laptop after the new rubber feet has been installed for more than 24 hours.Then,the adhesion between the rubber feet and computer case would reach the max value.