Feature(may vary by option.)

●Making smaller size than gland hole by turning seal to omega shape can avoid most of damages.
●Includes 3 sizes to cover just about any rod seal installation job from 0.87" up.
●Small for rod diameters 22-40mm(0.87" - 1.57" ROD) gland hole, 6mm cross section max
●Medium for rod diameters 40-70MM (1.57" - 2.75" ROD) gland hole, 8mm cross section max
●Large for rod diameters 70-165MM (2.75" - 6.49" ROD) gland hole, 10mm cross section max

[3 Pcs]





Description

3 pc3 pc

Oil seal matters needing attention

Recommended oil seal installation tooling and method

The oil seal matching surface is flush with the reference surface of the housing to ensure the installation perpendicularity of the shaft after the shaft is installed, so that the oil seal lip is in line contact with the shaft surface to achieve a good sealing effect.

concision

We did not install the handle to avoid the possibility of the product obstructing your view and causing the shaft and cavity to be scratched

Choose the tool that suits you

The product is very convenient in daily life, saving your time, alleviating your work difficulties, you can choose us.

Oil seal installation precautions to avoid pollution of oil seal：

  1. avoid deformation of oil seal,
  2. ensure shaft hole cleaning,
  3. use the appropriate fixture,
  4. jig to keep in good condition,
  5. to avoid oil seal tilt,
  6. installed in the right direction to ensure pressed in place,
  7. the rubber oil seal between the main lip and dustproof lip and lubricating oil,
  8. it is recommended to use the machine installation,
  9. oil seal is not allowed to repeat install and use

SS

MM

LL

Small for rod diameters 22-40mm(0.87" - 1.57" ROD) gland hole, 6mm cross section max

Medium for rod diameters 40-70mm (1.57" - 2.75" ROD) gland hole, 8mm cross section max

Large for rod diameters 70-165mm (2.75" - 6.49" ROD) gland hole, 10mm cross section max

Product information