Feature(may vary by option.)
●The carbon fiber door handle sticker exterior trim fits for Tesla Model Y 2020 2021 2022 2023 and Model 3 2017 2018 2019 2020 2021 2022 2023
●Made of carbon fiber. Precisely cut by machine according to the Model 3 and Model Y exterior original data. 1:1 perfect fit
●Easy to install. With high-viscosity adhesive, paste it directly. No adhesive residue on the exterior after tearing off
●Upgrade the exterior to make it more distinctive. Avoid scratches or cover scratches. Refresh the exterior
●Contain 4 door handle stickers. Quality Guaranteed. 7*24h customer service. Search "GZXinWei for Tesla" on Amazon or visit our Front Store for more products
[Carbon Fiber and White]
[Carbon Fiber and Blue]
[Carbon Fiber and Red]
Description
Carbon Fiber Door Handle Stickers Exterior Trim
Material: Carbon Fiber
Color: Carbon Fiber and Red
Applicable models: Tesla Model Y 2020 2021 2022 2023, Tesla Model 3 2017 2018 2019 2020 2021 2022 2023 (as of September 2023)
Contain 4 Carbon Fiber Door Handle Stickers.
Quality Guaranteed and 7x24h customer service.
Search ""GZXinWei for Tesla"" on Amazon or visit our Front Store for more products.
How to Install
1. Do not remove the adhesive protective film before installation.
2. Place the sticker on the location where it needs to be installed, and make sure whether the sticker is placed in the correct position and whether the size is appropriate. If you find any problems during this step, please contact us.
3. If the position and size are correct, you can tear off the adhesive protective film, then align the position on one side and paste it. If you find that there is a deviation in the position during the pasting process, you can gently peel off the sticker, re-align the position and paste it again.
4 After pasting, press the sticker for 15 seconds.
5. If the adhesive is not sticky or the temperature is lower than 15 degrees Celsius (60 degrees Fahrenheit), please use a hair dryer to heat the adhesive properly before pasting.
6. If the edges are lifted, use a hair dryer to properly heat the lifted part of the adhesive or use an appropriate adhesion promoter before pasting. Please press for 15 seconds after pasting.