Feature
●【Corner Clamps】Package come with 4 pieces 90 degree right angle clamps, can meet most of your daily needs! Saves time and reduces the difficulty of the work. Clamp range: 0-2.9 inch (0-74 mm).
●【Sturdy Clamps】Corner square clamps are made of high quality aluminium alloy with one die-casting molding. These angle clamps anodized with red surface and are perfectly water and rust resistant.
●【Adjustable Jaw】The swivel jaw can rotate the clamp to adjust work-pieces to different thickness. The frame clamps are designed with a reinforced joint to help prevent breaking due to excessive force.
●【Easy to Use】You can use the Right Angle Clamp to support your frame, clamping the joint at a 90-degree angle for precise and secure assembly, and this mitre-cut clamp comes with steel threaded vise screws and two countersunk mounting holes for permanent installation on a workbench.
●【Widely Used】The Right Angle Clamps are specially designed for 90 degree angles. Not only can it be used to hold 90-degree joints, but it can also be used for 45-degree sawing. Perfect for woodworking, engineering, drilling, fish tank fixing, cabinet and furniture connection, picture framing reinforcement, wooden DIY project holding and even metal framing and welding.
Description
Innovative 90 degree corner clamps make setup more manageable with L-shaped jaw that can clamp different pieces simultaneously, saving your time and freeing your busy hands without requiring more aligning and turning.
NOTE:
Gluing two boards do not over tighten the joint forcing the glue out of the joint - this will cause a weak joint and you could break or pull the washer out of the clamp.
Specifications
- Type: 90 Degree Corner Clamps
- Material: Aluminium Alloy
- Clamp Range: 0-2.9 inch (0-74 mm)
- Quantity: Set of 4
Package includes:
- 4 x 90 Degree Corner Clamps
- The Right Angle Clamps are specially designed for 90 degree angles. Not only can it be used to hold 90-degree joints, but it can also be used for 45-degree sawing.
- You can use the Right Angle Clamp to support your frame, clamping the joint at a 90-degree angle for precise and secure assembly, and this mitre-cut clamp comes with steel threaded vise screws and two countersunk mounting holes for permanent installation on a workbench.
- Clamp Range: 0-2.9 inch (0-74 mm).
|
|
|
|
|---|---|---|
Adjustable JawThe swivel jaw can rotate the clamp to adjust work-pieces to different thickness. The frame clamps are designed with a reinforced joint to help prevent breaking due to excessive force. |
Sturdy MaterialCorner square clamps are made of high quality aluminium alloy with one die-casting molding. These angle clamps anodized with red surface and are perfectly water and rust resistant. |
Widely UsePerfect for woodworking, engineering, drilling, fish tank fixing, cabinet and furniture connection, picture framing reinforcement, wooden DIY project holding and even metal framing and welding. |
