Feature(may vary by option.)

●Replace your lost or broken keyless entry car key fob remote with a KeylessPros.
●Replacement for P/N: KBRASTU15, CWTWB1U415, CWTWB1U733, CWTWB1U821
●User programmable with provided step-by-step instructions
●Complete electronic assembly with battery
●Durable long lasting construction, easy to use

[4-BTN]




[3-BTN]




[4-BTNx2]




[3-BTNx2]





Description

antitheft smart car keys fob oem replacement keyless entry programming remote control locksmithantitheft smart car keys fob oem replacement keyless entry programming remote control locksmith

DIY Self-Programmable Keyless Entry Remote Key Fob Replacement

A brand new KeylessPros remote key fob replacement transmitter for selected vehicles that comes complete with electronics and battery. 100% new, never used remote.

KeylessPros replacement remote key fob that will work and function just like the original one.

Every single remote has been pre-tested by our team to ensure compatibility and that signals are transmitting properly. Free support is available with your purchase.

PROGRAMMING:

Easy to follow step-by-step DIY programming instructions are included with your purchase. Please read the Program Card provided with your order.

In order to perform the DIY programming for this remote, you need to have 1 working original key that starts your vehicle.

**Will NOT WORK if you have Nissan Intelligent Key (smart key, proximity system, push button ignition)

COMPATIBLE WITH NISSAN

2004-2015 Nissan Armada
2002-2019 Nissan Frontier
2003-2008 Nissan Murano
2012-2017 Nissan NV Models
2002-2013 Nissan Pathfinder
2004-2015 Nissan Titan
2007-2012 Nissan Versa
2002-2015 Nissan Xterra
2005-2010 Nissan Quest
2011-2013 Nissan Juke "S"
2008-2013 Nissan Rogue
2014-2015 Nissan Rogue Select (USA)

COMPATIBLE WITH INFINITI

2002-2003 Infiniti QX4
2003-2009 Infiniti FX35
2003-2008 Infiniti FX45
- -

How to Program your KeylessPros Key Fob Replacement:

1 Close and lock all doors with the driver’s side power lock switch located on drivers door panel.
2 Insert key into ignition (DON’T TURN) and remove it from the ignition key cylinder at least 6 times within 10 seconds (this will need to be done at approximately one second intervals). You may need to insert and remove the key up to 10 or 12 times until your hazard lamps flash. PLEASE NOTE: Withdraw key completely from ignition cylinder each time. If this procedure is performed too fast or too slow the system will not enter programming mode.
3 Insert key into ignition and turn to the ACC position.
4 Within 5 seconds, push the LOCK button on the keyless remote. Your hazard lamps will flash. PLEASE NOTE: Do not press the button on the remote more than one time or the programming will not be successful.
5 If there are any remaining remotes (including working ones), Unlock then Lock all doors using the switch on drivers door panel. Within 5 seconds of locking and unlocking doors press LOCK button on the next remote. Your hazard lamps will flash. Repeat this step for each remote (including any working remotes).
6 When all remotes have been programmed turn the key to the OFF position, remove keys from the ignition, unlock doors using the driver’s side power lock/unlock switch and open the driver side door. Test all remotes.
**** Please note: You must have all remotes on hand when performing this procedure. Any remotes not used during this procedure will become inactive.

Please be sure to check if the remote key fob is compatible with your vehicle.

Please make sure that your original remote has the same EXACT buttons on it.

***We cannot assure vehicle compatibility outside of USA***

Brand New Aftermarket Replacement For: ‎‎KBRASTU15, CWTWB1U415, CWTWB1U733, CWTWB1U821, 28268-5W501, 28268-5W500, 28268-7Z800, 28268-C990A,28268-ZT03A, 28268-EA000, 28268-EA00A

Product information